Socket SDIO Card w/Linksys Wireless B Network Kit and Axim-3

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Hamish McStill - 25 Apr 2004 14:49 GMT

Setup router and laptop works fine wireless.

When connecting w/Axim net work status shows scanning and not
connecting to channel 6 (set in router configuration).

Also Socket says to obtain a root certificate from admin...this is a
home network...how to I install a root cert?

TIA

Reply to this Message

David Hettel MS MVP - Mobile Devices - 25 Apr 2004 19:10 GMT

Sounds to me as if your Axim-3 is NOT configured for WEP but a more advanced
encryption. You should not need a root certificate for WEP. Is your Linksys
a G/B wireless system? If so you may need a newer firmware for the Linksys.
Also have you disabled the SSID or Network Name on the Linksys?

Signature

David Hettel
Microsoft MVP Mobile Devices

This posting is provided "as is" with no warranties, and confers no rights.
You assume all risks for your use.

Handhelds, mobile: http://www.geekzone.co.nz
Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449

> Setup router and laptop works fine wireless.
>
[quoted text clipped - 5 lines]
>
> TIA

Reply to this Message

Beverly Howard [Ms-MVP/MobileDev] - 25 Apr 2004 21:47 GMT

Which Axim do you have? (fwiw, the X-5 slot is not SDIO)

Beverly Howard

Reply to this Message

Hamish McStill - 25 Apr 2004 23:19 GMT

Axim 3...for what its worth I have been able to connect intermitently
and have found references on line stating similar problems and
solutions...sucj as hold the card in ur finger while connecting.

Submitted a e-mail to Socket.

Ham

>Which Axim do you have? (fwiw, the X-5 slot is not SDIO)
>
>Beverly Howard

Reply to this Message