I've been searching through the groups and it looks like everything is
over my head.
I have an IPAQ Running Pocket PC version 3, wireless card (compaq
wl110 - 11mbps), and am trying to connect to a wireless network.

Since I have bluetooth on my HP 5455, I am thinking there is a way to just
hook run the headphone output to my home stereo, and somehow run the signals
from my Jukebox player of my computer to my pda, without actually download
the music to the PDA at any time.  Is that possible?  I ...

Please Help!
I'm going insane.

    Just a quick couple of questions. Using iPAQ5550 and PPC2003. Does
anyone know of a little utility that I can get that will close programs down
completely? At the moment the programs disappear when I click on the X, yet
looking in Start/Settings/System/Memory/Running Programs.. ...

My HP5550 want except *()|/\?#$ etc. in the WEP of SSID
fields. I talked to Microsoft and was told me they were
aware of the problem and we be sending a fix shortly. I
have not received anything , but I guess it's in the mill.

I have an iPAQ 3850 with a PCMCIA sleeve and have just acquired a Netgear
802.11b card type MA401.
Am currently running PocketPC Version 3.0.11171 (Build 11178)
Does anyone know if drivers are available to enable me to activate this

Perhaps I'm not reading a manual or something - but the logic of setting up
a PPTP VPN connection on the PocketPC completely escapes me.  Setting up a
VPN connection on my XP notebook is as easy as falling off a log and
completely logical. Could someone please point out the logic of ...

On my home network, if I have just my Computer (Wired) and Laptop (Wireless)
running then I can access files on my Laptop from my Pc, but if I switch on
my Pocket PC (Dell Axim 3xi) with Wireless enabled then I get denied access
to my laptop network and the following errors appear ...

Ok, a little clarification on the previous ... Ipaq 4155
trying to configure web browsing through a Linksys Access
router going to a cable modem and Comcast broadband ...
All settings are set as work connections, all are set to

I have a IPAQ 2215 ppc 2003.  I have an AmbiCom WiFi card
and after a month of working on it I finally got it to
sync consistently with an XP box (i'll share what I did to
get it to work at the end).  But each time I tap the stop

I bought a WRT54G router and after difficulties managed to connect my
laptop and my h5450 to the internet , can anyone advise my how i can set
up a network through my router

I have a Wireless Lan PC card (2mbps) from Symbol
Spectrum24(802.11) for my PC.
and I have a PocketPC(from Symbol too) with same Lan card.
Now I insert  the card into PC and it shows everything is

Ok folks,  I purchased a new Toshiba GenioE Pocket PC and purchased a
NetGear CF wireless network card.  It all worked for about 1 month.  THen,
the CF port would no longer power up the CF slot.  No CF cards will work in
the slot.

At last I have been able to successfully iPAQ 5550 wi-fi browse
through my access point then gateway router to cable modem.
Everywhere I have beeen reading that I would need to use the "My
Work" setting but i have it working with the My ISP setting.

I have read about Media Player recognising my 2210 as a portable media
device, but I cannot get it to detect my PPC. Currently I am trying it via
my Belkin BT dongle, i'm not sure what kind of connection I should establish
and how to get it detected.