I'm trying to get my image (which I can download using EBOOT.bin and runs
just fine) to boot on its own and have followed some good advice on this
forum by trying to make it work first with LOADCEPC, then try to get it
working with a bootloader.

I have an ARM based Win CE 4.2.
Can I have inline assembler in my C-code ?
I have not found any information about this in the documentation
so I assume not.

I used to develop application with Visual Studio 2003. I generated a cab and
installed it on the Windows CE .NET 4.2 PDA. All went well.
Now I installed VS 2005 and whichever type of mobile application I use, the
application is published but doesn't work : it seems to start but ...

I have a USB device with a driver which enumerates the USB descriptors
to the PC when connected. I would like to force this the device to
re-enumerate programmatically at run time from another application.
The CM_...() functions of Windows are not available on CE to do this.

I am using WinCE 4.20 with TFAT file system on CompactFlash. It works OK,
but I can not create more files than about 1500. I made test application to
automaticlay create files in subfolder and it stops creating files when
maximum is reached with ERROR_DISK_FULL (112), even there ...

My development board is Intel PXA25x. Which BSP should I select for
that in PB 5.0?
I selected "Intel PXA27x Dev Platform:ARMV4I". When I try to download
the image on the board, I see following output on my hyperterminal.

I have been trying to bring up the LAN (82541GI) on the ICH4 on a Pentium M
system with 4.2 using the E1000CE4.dll file downloaded from the Intel site.
The system hangs on 'int 3' during initialization. Has anyone been able to
get the 82541GI to come up under 4.2?

Is the evaluation version of Platform Builder 3.0 available anywhere?  The
device we are currently working with is running CE 3.x, and it doesn't seem
that Platform Builder 4.2 or 5.0 are suitable for our needs.

i've created the cepc image nk.bin for my via mini itx computer, created a
boot disk , but when i run the loadcepc program on my target machine it
failes,
this is the command i run.

I am newbie for WinCE world. I am facing a strange problem! I've  a device
driver which switch on I/O and then wait for the Response. The Response of
I/O after power up takes few seconds. After I start successfully I/O module,
Application take control though device driver, But ...

Thanks again to everyone (especially Peter Beard) and Steve Maillet who have
been so willing to answer what are probably pretty basic questions.  Here are
a couple more:
1.  How do I force a recompile of the BIOSLOADER code?  In my File View

I included the UHCI driver in my image (PB4.2). The chipset being used is
Intel 82801 for Pentium M based systems which has 3 hubs with each 2 ports
Most of the times this works fine. USB mouse, keyboard, disk OK.
Occasionally when my mouse or keyboard are connected at boot time to ...

I was able to successfully boot from a floppy using the specialized
eboot.bin file provided in my 3rd party BSP (VIA EPIA ME6000 micro-ITX board)
and then download an OS image created to my specifications using platform
builder.

Does anyone know how much kernel source code that is available in
Windows ce 4.2. and 5.0 ?
All, or just parts of it.
My reason for asking is that I'm writing a short paper on Windows CE.

When trying to connect a Mainstone II using CE 5.0 and USB to a WinXP host
via ActiveSync, it fails to get past 'Connecting' stage on the host PC.  The
CE device says it's connected.  The host PC recognizes the USB device as a
'CE device', and gives the happy tone on connect.