After I install the MS WinCE4.2 QFE,  the htmlview.dll can't be generated,  
in ($_releasdirectory\WNCE420\($_releasedir)|cesysgen\oak\files\ceconfig.h
There is no
#define WCESHELLFE_MODULES_HTMLVIEW 1

I have built two OSs.  The first was marked for development use, so I
included just about everything using the "New Platform Wizard".  The second,
my choices were more restrictive.
I noticed the missing libraries in the packing list provided along with the

 i am using the smdk2410 in ce.net 42. Now i write a
serial program on COM1: , but the smdk2410 using the COM1 as the
RETAILMSG(..) funtion.
 So I can only using  share mode to make the COM1 work.

I've got an intersil based WLAN card (Asus WL-110). It is a 16 bit 802.11b 11Mbps CF-card.
This card is running perfectly on an ARMV4 CE 4.2 debug build using the microsoft islp2 driver
that comes with PB 4.2. However, on a retail build the card cannot be detected and I'm asked
for ...

I am trying to get a wireless network card working on my WinCE 4.2 device.  
I can install the drivers and use the card on another machine in the same
room.  However, when I install the drivers and try to use the card on the
device we are developing, no networks show up in the ...

We're migrating our projects from CE 4.2 to CE 5.0 and we have a problem.
The applications that we build with eVC 4.0 fail to run if they are placed
in MODULES section of the bib file.
Specifically, a debug check occurs in the following line in

I have VIA chipset based board with integrated PCCARD adapter (Ricoh
R5C476). I developing Windows CE 5.0 solution for this platform. Under Window
CE all memory cards inserted in to CF/PCMCIA slot are working very good.
Today I trying to use Microsoft MN-520 wireless card and see ...

Windows uses 29 system colors (COLOR_SCROLLBAR, COLOR_BACKGROUND,
etc.) in a fixed registry order (0-28).  When using indexed color, and
Windows is painting a pixel using COLOR_BACKGROUND (registry order #1)
for example, does that pixel thus end up with a value of 1, matching

Hi. Did anybody try to use CS8900A stuff from the PUBLIC OAL library?
Does it really work?
There is no previous transmit pending state cheking in the CS8900ASendFrame
routine

I build a Image for SMDK2440.
I use PB4.2 to do this,and it's working.
Now,
I will build PPC2003 Image for SMDK2440.

Guessing this is simple, but can't seem to work through it...
I'd like to build my environment on my dev machine, then install from the
dev machine to a hard drive mounted to the development machine via a USB
drive enclosure.

I use  debug version image and load it from ethernet in this case I have no
problem but when I want to load image to flash card I have.
I build  release version of image and with tool PTUpdate I try to load to
device but I get error of limited memory. although I connect the flash ...

I trace the eboot codes, and I found it uses "EdbgOutputDebugString" to send
messages through com port.
In my system, it use com 2.
I want to change it to com 1.

What are the default bits per pixel and system colors that Platform
Builder uses if no changes are made by the developer?
I would like to use a monochrome LCD display with 4 bits per pixel
setting.  I've got the driver running so I get a display, but the

I encountered a strange problem when setting the date and time on my target
platform. Setting breakpoints in OEMSet/GetSystemTime shows that the
requested time is read/written correctly from/to the RTC. But it seems that
the values are confused somewhere on the way from the OEM ...