Hello ce gurus.
I'm using a specialized board with precompiled ce 5.0 BSP
(no sourses included, just precompiled OAL and device drivers
DLLs, EXEs, LIBs, PDBs etc for Debug and Release configurations).

i've read another recent post regarding nesting interrupts, but im not at
the same point, so ive started a new thread.
I am trying to enable an interrupt thread that is signalled when i receive
EINT0 interrupt. The arm core only has one IRQ.

How to disable the serial debug message and make the kitl
work at the same time?
Thanks.
Bryan

My platform is a Kontron ThinkIO, an industrial X86 with a CE.NET 4.2 BSP
(CEPC based) supplied by Kontron.
It has onboard CF (32MB) and a single external CF slot.
I've been successfully using external 256MB CF, booting MSDOS and then CE

I have a questions regarding how to make the IP address within Windows
CE configurable.
Some background:
I have built an OS image for Windows CE 5.0 (using Platform builder)

I'm currently having problems with a Philips USB host chip connected to my
Prolificx Eagle 250 ARM4 (Intel XScale) WinCE system.
Philips have provided the source code for the host chip driver and this gets
built into the WinCE image by Prolificx, who then pass the image to us for

hello! i search how to view in Internet explorer for windows ce, java web
pages?
I don't found where and how i can install a JVM on pocket pc.
Thanks for your help

   As we know, function  WaitForSingleObject(HANDLE hHandle, DWORD
dwMilliseconds ) returns when the specified object(hHandle) is in the
signaled state or when the time-out(dwMilliseconds ) interval elapses.
But,if the system is busy,then the object is signaled and time-out ...

Hi;
Is it possible to combine the CE.5 Remote Desktop Connection & RDP with a
CE.5 platform that uses the Standard Shell?
The reason for this is that I have a client whom has a customer who requires

  I am writing stuff for a arm powered embedded device with a number of com
ports. My problem is I need to put external modems (GPRS, CDMA) on these
ports and run them using RAS to establish PPP sessions. While seeing the
registry on the device which runs ce.net 4.2 I found that ...

I have a lan91c111 driver, when entrying driverentry() function, first it
calls NdisMInitializeWrapper() function, but there is a data abort:
  ===> NdisMInitializeWrapper ( )
   Data Abort: Thread=8bedcab8 Proc=88da69d0 'device.exe'

Two questions:
1. In PB5.0, help topic "Choosing an Ethernet Card for a CEPC," _why_
isn't Vendor ID 0x8086 (Intel) supported (in light of the fact that
Intel and Microsoft, a.k.a. "Wintel," are inseparable)?

I'm about to order an evaluation board based around a Samsung S3C2410X
ARM processor. Our company would like to develop "host" applications
which interact with our own embedded device using IIC and SPI I/O. This
work is entirely "proof-of-concept" and we will not be selling an

Hi there - I am looking for webview.dll for PPC2003 as described in
documentation - and couldn't find it anywhere...
Or - how else am I supposed to get an IBrowser???
Thanks - Irena

CE 4.1 ARMV4I
I see where there were rendering issues with jpegs at 8bpp and that QFE
811387 address that. I have that QFE installed, but I'm running 16bpp video,
so its probably unrelated.