I am trying to download an image to a Mainstore II and when I try to
configure the connectivity options through the Target menu I get the
following warning Message:
"Platform Builder was unable to read the device settings from the

I've implemented the Spanish layout driver successfully.
I can input correctly the plain characters, but the diacritic ones such as
"á" appears as "a´".
Any clue about what is happening?

Does anyone know if it is possible for a NDIS driver to prevent the
tray icon from being displayed when there isn't a connection to it?
I'm developing a NDIS driver for CE5.0 and the "disconnected" tray
icon shows up when I drop the connection.

I'm currently developing my own FMD driver for Windows CE 5.0.
All FMD functions are implemented and working nice. Tested manually
(without the FAL) and all FMD_xxx routines like write/read/erase/lock/unlock
etc

ie Menu-Tools-Remote  Process/Registry/File/Process viewers
PB connects via kitl but fails with the clients as follows:
SYSTEM
135195 PID:6ea4886 TID:6ea4fca 0x86bbbe40: CreateNewProc failure on

  I use CE4.2 PB before, I just install PB5.0, I create a simple image and
test it, I found I can't save registry setting after I reboot computer, how
can I let CE 5.0 save changes after reboot computer?
 Thank you!

I'm having trouble accessing my custom application:
I have created a new custom project, build it, added it to the Catalog,
then included it in the OS Design and rebuild the image. But testing the
image on a target device, I cannot find my custom application...

I've been doing debug builds with PB 4.2 for quite sometime and never ran
into any problem until recent days.  In order to figure out what was going
on, I created a simple platform with the New Platform Wizard and started a
Ddebug Build straight from the wizard, and yet at the ...

I am trying to include agfa ac3 font compression without adding any
ac3 font file in my os image. I do not want to create an os image per
supported language. Instead I would like to be able to add a language
specific ac3 font file into my device in the field and I would then

Hi, how is going ??
this is Tiziano Fabbri.
I'm trying to setup the hive-based registry and I have some question about:
- I'm following the help in platform builder "Using the Hive-Based

I was going to use PB 5.0 evaluation version.
Recently, our company buys a PB 5.0, so I want to re-install it.
Howerver, it is failed to re-install it.
The following message is shown. Why ?

I build a WinCE platform. When it starts, the UART0 send this message:
Data Abort: Thread=8fef059c Proc=8e026958 'filesys.exe'
AKY=00000003 PC=03fc9b94 RA=0001db10 BVA=04000000 FSR=00000007
what does it mean?

I build a nk.bin by using the smdk2410 bsp,
but I can not find a nk.nb0 file.
How to build it?
Thanks.

How do I set /Zp option in the project source file? Thanks!

  I want to use the IE of the wince42 to play
flash.
  Is there the flash play control for WINCE42'S
IE.