Hi experts,
    I want to enable DMA mode for serial driver on PXA27x. I find it is
somewhat difficult.
Where can I find some guide document or sample code? Thanks a lot in

I traced the MS codes to find a alarm issue.
I do not know how to find the caller of SC_SetKernelAlarm.
How to find it ?
Thanks.

[This followup was posted to microsoft.public.windowsce.platbuilder and
a copy was sent to the cited author.]
Hi all!
I'm developing a BSP for my WindowsCE custom device, based on a

I've been searching this NG unsuccessfully for a list of files for a
platform that I should include in source control.  Another developer
and I would like to share a platform.  He works in St. Louis and I work
in Chicago.  We both use SourceSafe 6.0 and PB 4.2.

If I make a direct serial connection with a NULL-modem from my
PC(RAS-client) to my CE-device(RAS-server) and then disconnect while
the PPP negotiation is not finished, the RAS server stops working and
do not accept any more connections until I reboot the device.

I replaced three folders from Windows CD 5.0 installation(PUBLIC,PLATFOR and
PBWorkspaces) . Then while starting the PB it is showing that WINCEROOT is
not set or invalid. Then i tried to  set the WINCEROOT as my WINCE500 folder,
but it is not accepting it as as root. Let me know ...

When I create a project and choose release configuration with default
options. Then I build an OS image and download it to the target. After
the process of downloading is completed, a message prompts in the output
 window:

How to use the format "\\192.168.0.X" to connect a computer in CE 5.0?
I can connect to a computer with the format "\\ComputerName", but just
can not use a "\\" following the IP Address.
Which component would I have?

I have a demo board with a PCMCIA slot.
I have a WinCE 5.0 OS on it.
I have a PCMCIA adapter and a CF storage card.
I am trying to detect the storage card in my OS.

We are developing a Thin Client solution with WinCE 5.0:
The issue is Not Printing thru parrallel port on Centronic interface.
Test Environment: WinCE 5.0 running on X86 platform based on Geode
Print Ok on generic Deskjet and Laser printers.

I added this component to my design and added the registry entry
example in the documentation.  Usbmsc.dll and Usbdisk6.dll  never load!
I am obviously missing something.  Do I need to modify the registry
entry in some particular way?  Do I need to modify my USBOTG driver

I have a number of linker warnings which I would like to get rid off,
because there are about 100 of them, making finding ones we may be
interested in difficult.  We are using wince.net 4.2 and from reading
previous posts wince.net 4.2 should be able to suppress these by

I ported wince 5.0 image to my target board which is ARM based
processor. The target is working fine when it is connected to the
platform builder, all my applications and drivers are working. When i
select target->detach device my target does not respond.

I met a very strange problem ,Trueffs on DOC is readonly when runing release
verion on ce 5.0. i.e, The folder DOC appears but we can create new folder or
new file on it. when runing debug version , everything is ok. anybody can
give hints what

I have an application developed using evc 4.0, I also managed to create the
application in Platform builder 4.2 and get a pbp file.  The next step is
that I want to create a sources file so that I can add it to my cec file.
I have created a SOURCES file and all the files compile ...