hi
  I am now searching UDA1341 driver . I have found that in wince 3.0
sa11x0bd bsp there is UDA1341 driver. unfortunately , it seems invalid in
winCE.net . how can i get it ?

 We are using Windows CE.NET 4.2.
   We are getting numbers from this API which does not correlate with the
actual hardware memory we have. We are considering hardware issue remote
possbility for now.

Thanks to the postings from Steve Maillet and Bruce Eitman, I now understand
some of the benefits for cloning public code tree changes into the platform
tree.
However, I have modified the oomui code to handle our out-of-memory

Using pThread ID, it's possible to get the name of current process and
owner process from pProc/pOwnerProc field of struct Thread defined in
~COREOS\NK\INC\kernel.h
Are there any ways to get the MODULE name (ex: battdrv.dll) from some

I get the following error:
\WINCE500\PUBLIC\COMMON\OAK\CSP\X86\GEODE\ROMBOOT\ .......
Linking C:\WINCE500\public\COMMON\oak\lib\x86\debug\MGXPLAT.lib
BUILD: [01:0000009937:ERRORE] LINK : fatal error LNK1181: cannot open input

 This is going back a bit but, i am trying to get a DBPXA255 Lubbock board
running with Win CE.net 4.1 with
Lubbock BSP. I have created an OS image and flashed eboot.nb0 from release
directory to

Any ideas as to what (which) SYSGEN variable the error message is
referring to?  All I did was change the power manager tiemout values in
platform.reg and now I can't bring up a CEPC (that had been working
just fine previously).

When I do some setting in control panel,I found some menu its "OK" is out of
my LCD display range(320*240),how could I do? Is there any way to zoom out
the menu?

What does "AYG" stand for in "AYGShell?"
It's only for Pocket PC support/compatibility, right?

Hai Greats,
I am new to Windows CE Device driver programming. I worked in Windows
CE OS integration, booting.
I need to develop one Application to control GPIO connected device. I

After I downloaded the nk.bin to CEPC, the debugger started. But the CEPC
didn't reply any commands from the IDE. I checked the serial port
(HyperTerminal),  the CEPC keep sending "Timed out waiting for ack" as the
followings:

Is there any way of programmatically entering the username and password on a
CE device.
I would like to write an application that sets the username and password for
network access so that I am not presented with the windows username and

My company supplies image decoders to many WinCE vendors. We wrote our
own USB stream driver. The driver has been worinkg well with many WinCe
machine. However, we ran into problem in a new WinCe machine from a vendor.
The problem is that the machine only receives every other ...

I am using Wince5.0 eval and cannot find Insert User Feature in Platform
Builder.
But PlatForm Builder 4.2 can find it.Who know where it is.
Thanks forward

I have followed the article "Cloning the Microsoft Public Common Code" to
create a platform specific copy of kbdhid. When I complete all steps and
"Build and Sysgen" the Ce 5.0 platform, kbdhid.dll is still built with the
code in the public tree (I added retailmsg's identifying each ...