When I have two USB devices plugged in at boot time (say a USB keyboard and a
Mass Storage Device), only one will enumerate.  The second will install
properly if I plug it in after boot.  
It doesn't seem to matter which USB devices are used - I get the same

i use for development a opteron based and a p4 with em64t machine with
winxp64, now i would to update from ce4.2 to 5. after may failed installs i
enabled the logfile for the installer and found that the vmm.sys driver was
failed. vmm.sys is part of the visual machine monitor ...

Does Windows CE 5.0 have multiprocessor support?
And if so, is it possible to assign applications to specific processors?
TIA,
Richard Rosenheim

Hai All,
I am working for a ARM based Device with 32MB Flash and 64MB SDRAM.
I ported WinCE5.0 Iamge onto it including "Flash Update Sample
Application" catalog Item.

how can updata dot net CF to sp2 and where can download it ?

  Here I meet with a problem about edit control.
  My edit control has multiline property. And I set the max characters
through EM_LIMITTEXT with prarmeter -1, wanting to including 0x7FFFFFFE
characters.

I have a host pc that I am using for my PB development.  (5.0)
I find that if I enable HT in the BIOS, my debug process is very slow.  If I
disable HT in the BIOS, it seems to be normal speed.
Is this expected?  I would prefer to leave the HT on as it helps to enhance

I'm looking at the VIA's EPIA mini-ITX line of embedded motherboards.  Does
anyone have any experience with them?  Good, bad, indifference?
Richard Rosenheim

I was debugging my own audio device driver and get follwoing call
stack log after stopped at some breakpoint inside the driver code.
You can see NK and DEVICE in the middle of the call stack. Does that
mean the functions of an EXE file can be called by another

Hai
I am using platform bulder 5.0. I have made an mage for x86 platfoem(Chipset
is Via CLE266 ).
If i booth the image from local flash,it takes around 2 minutes to gwt the

I have two fully operational serial ports (FFUART and STUART) on my
XSCALE-device. I can use both at the same time from my application.
Now I would like to have one of my ports supporting the DEBUGMSG command.
The only way I have managed to do this is by setting BSP_NOSERIAL=1 (no

we have INTEL ECM 5616 board and we included Intel 81XAC97 audio driver.
We downloaded the VOIP application to the board via serial port.
We are able to make the call from emulator to Board but audio in ECM
receiver is playing fast and the board is not at all transmitting the audio ...

Could someone pls tell me why the following code does never
return from the second WaitForSingleObject call !?
HANDLE Active = OpenEvent(EVENT_ALL_ACCESS, FALSE,
TEXT("PowerManager/SystemActivity_Active"));

I tried to create a CEPC platform based on an old Pentium 3 PC with a 3Com
3c90x Ethernet interface.  I had used the CEPCBOOT.144 utility to create the
boot diskette.  The PC was booted up with the default
config.sys/autoexec.bat options.  The ethernet interface was correctly

In my bootloader CPU frequency is configured to 200MHz and it is no way to
upgrade.
Is it possible to change the frequency to 400MHz later, from the OS?
WinCE 4.2, Platform based on Intel PXA 250