Has anybody had any problems with the file server on CE 5.0?  We have
it working on 4.2 no problem, but it doesn't work on 5.0.  The only
changes I can see between 4.2 and 5.0 is that 4.2 requires you to load
smbserver.dll as a built-in driver, and 5.0 does not.  Regardless, we

Is there a bootloader available (free or otherwise) that can load the
winCE5.0 image from a FAT partition on either a MMC/SD Card or SMC for the
SMDK2410?
Thanks,

I've set up my CE device to support  a mass storage device over USB 2.0.
What I find is that sometimes the device is DSK:2, and sometimes the device
is DSK:3.  We've written our application to use DSK:2 so we obviously have a
problem when it installs as DSK:3!

i am implementing usbrndis kitl driver, but i am not using the RNE_MDD lib.
so i am putting my functions to the OAL_KITL_DEVICE interface..
everythings works but it is slooooooooooooow.
I see init, send frame, get frame, enable ints, disable ints, filter and

It seems that ActiveSync through etherne must use serial/USB/IrDA/Bluetooth
to create partnership firstly.
My question is that if my platform has only ethernet and no any
serial/USB/IrDA/Bluetooth. Is there any way to create partnership manually,

I have an platform configuration that is working  on release mode without
any problem and  I want to shift to debug mode to trace my applications.
When I build the platform on debug settings I'm getting linking errors
becaouse of the oal_xxxx.libs are not exist under the folder

I would like to boot from NOR flash and then load the OS (NK.bin) from the
SD card on our device (using a i.MX21 cpu)
Does CE support this?
I have an SD driver intended to run within CE, but that is not much use as

Microsoft license model requires a Client Access License (CAL) for each
device managed by System Management Server (SMS). Do you know what is the
runtime cost for each managed device?
I found that a Microsoft Licensing Pack with 5 device CMLs is $279 (5 SMS

Where can I feedback a possible CE 5.0 PB BUG about USB 2.0 HCD driver
(EHCI) driver to Microsoft CE team?
---
Best regards,

We have PXA255 (200Mhz) based platform with 32MB SDRAM and 64MB NOR flash.
When running Cerdisp application our platform is very much overloaded. With
Kernel tracker I found out that Cerdisp is running almost all the time
decreasing response time of other processes. What can I ...

this is ce 5.0, mainstoneii's eboot.bib
i was placing my big data buffer in 80060000, which is GAP, reserved for
future.
and I found out that someone is using this space during image download. and

 I have written a simple app to write text to a terminal via serial port.
Looking into the serial
 driver code which is in a dll i have noticed it has a pointer to a
structure which contains register

I have several libraries under WINCE500\PUBLIC\MyCompany\OAK\...
These libraries are required by an executable also under
WINCE500\PUBLIC\MyCompany\OAK and by an executable under
WINCE500\PLATFORM\MyBsp.

 I have a .net cf application and some 3rd party .NET dlls, whenever
I tried to including ANY one of these .NET code I get the following error.
I am using 4.2 with CF SP3.
I can build an image without these and download these .net code thru

I'm writing a USB driver and found some seriously confusing stuff!
If someone could just shed some light on this that would be great and
probably be appreciated by other as well as myself.
Thanks in advance ....