I would like to figure out to detect when a ce 4.2 device is connected or
disconnect to or from the network.
I found the API call CeSetUserNotificationEx().
I set the trigger event to CNT_EVENT, and the trigger event type to

I want my target to boot with eboot.nb0(in the nand flash).
If I execute eboot.nb0 using DNW(0x30038000), eboot is operated well.
But I execute eboot.nb0 in nand flash(1 block), eboot displayed error,
such as

I am building application which I are going to use a CSR based
USB Bluetooth adapter under windows CE however due to size constraints
Ineed to produce specific builds of WinCE5.0 with the minimum of
functionality and I have hit a query.

anyone have it work in ce 5.0? it return null pointer for me when i try to
get the frame buffer pointer.
but the same code works fine in 4.2
is it discontinued or replaced?

I'm doing a review on a driver that was written for a custom board. The
driver appears to be running fine. During the debug we get the following
messages -
4294771657 PID:43bbdac2 TID:e3b23fce 0x83b23da4: IOBoardDriver.cpp:

Does Windows CE.NET 4.2 Platform Builder generate native code for the Intel
PXA255 i.e. does it make use of the ARM V5TE instruction set? Or does it only
generate ARM V4 or ARM V4T native code?
If not, can Windows CE.NET 5.0 generate ARM V5TE native code for this

I understand that when doing a ship build it "removes" the RETAILMSG. Why
the distinction between a retail build and a ship build when there is also a
debug build? Or just giving another level "sifting" out process/debug
information?

Hello out there. We are upgrading from a 4.2 to 5.0 and we are having
some difficulty / confusion. I was wondering how other people do their
builds. Any comments appreciated.
We use platform builder to create an entire image. The customer never

Something strange with "BattSuspend" timeout
on Windows CE 5.0.
When my system is running on AC power
all AC timeouts seems to function properly.

After loading  nk.bin, Data abort exception is happend
when the code access  the memory at 0xc2000000.
I have use WINCE 5.0
How can i debug this ploblem?

Does anyone have a RS485 driver ready to go on PXA255 PB4.2 using a two
wired RS485?
I will also need information about required registry setting.
/trond

What does this mean?

4294767604 PID:41c9e23e TID:41ca3fda 0x81c9e000: >>> Loading module
stratad.dll at address 0x034D0000-0x034E4000 (RW data at

reinstalled PLatform Builder 5.0 after the 120 days evaluation period (I
used it a few days)
and now I get the following error when opening a workspace
System.Runtime.InteropServices.SEHException:

After I installed VS 2005 Beta 2 and WM 2005 SDKs/emulators,
my existing PB 5.0 fails to run images under emulation
(this appears to be by design, in fact I have seen
instructions to uninstall PB entirely).

 am using the pb42 on our device which is the s3c2410.
and I found there are some devices cannot run the the retail
OS ,but all these can run the debug version of ce42.
 After print the FMD::FMD_Init, then the os is stop,but