I am writing an NDIS driver for a PCI NIC (Intel Pro Wireless 2200) on a
CEPC, for CE.net 4.2.
The platform is equiped with another Ethernet chip on the PCI bus. The
driver for this chip comes from Intel (E100CE.DLL, for 8255X network chips.)

I have 3 USB driver, USB function controller driver (USB Bus driver), USB
transceiver driver(USB Bus driver), USB host controller driver(Host
controller driver) in my catalog. When I add these drivers to my OS design, I
am able to see only USB transceiver driver and USB function ...

when I include my driver and give a build, the number of warnings is
increased by 1. But I couldn't find warning in the log. Is there any way to
find out what is the warning.

A quick (and possible "no-brainer") question about the object store
compaction thread:
Does the object store compaction thread run, even if there are no
registry settings for it (i.e. -

I am building a GATEWAY platform on INTEL XSCALE processor on Win ce
5.0.
When the runtime image is downloaded,the system does not load
"shell.exe".I dont know why it is happening.

hi
i'm doing migration of the OS from WinCE 4.2 to WinCE 5.0.after migrating my
OS design and  project ,my EXE is not launched.so i compared with WinCE 5.0
with WinCE 4.2,there i noticed cesysgen.bat file is empty in WinCE 5.0.in

I just hope someone from MS wince team really monitors
this NG (it would be really strange if not) and will redirect this
message to a proper person.
Well, the problem is CEMON.EXE causing exception

Is it possible to install windows ce .net xx on a 128mb flash memory? If yes
where can I find/download windows ce? Currently I have a card reader which
give me access to flash memory.
Please advice,

Good day!
i am trying to build a WinCE 5.0 image using platform builder, everything
was fine except that it only detects 32MB of RAM.
my system has a 128MB RAM. 16MB of which is being used by the built-in video.

I have the Viper development kit from Arcom (Xscale processor, WinCE
4.2) which supports fine the LCD NEC NL3224BC35-20 (320x240 TFT color
display). Now, I want to use the LCD AGM WG320240D-TFH-V (320x240 FSTN
mono display) but I don't have driver for this display.

A very specific question:
has anyone used an external SD Wifi card with the MMC controller of the
PXA255, and this under CE 4.2 or 5.0. Most manufacturers offer
solutions for Pocket PC or other commercial devices. Please notice I am

   When i program,what it is different between RS485 and RS232.
--
Jerry
Masterpiece Technology

I am a newbie and recently I was interested in OAL. I want to known that Can
I step
into the OAL source code and How can I do that. It doesn't work when I set a
breakpoint in the source code.Need your help and thanks in advance.

Does the WinCE 5.0 support MPEG-2?
Does the WinCE 5.0 support MPEG-2 streaming?
Note: I mean SW(OS) solution, not HW solution.
Thanks.

Dear Sir,
I use Intel PXA27x and WINCE 5.0 for my project.
Currently, I can control usb mouse and more cursor.
But If the cursor move to task bar , the system will hang up.