We have been loaned a MAINSTONE II development board, but do not have an
image to download to it, I will search the Intel site, but would be grateful
if someone could advise where I could download bootloader and binary image
for this.

 Now i want to implement suspend/resume functions on my mobile phone base on windows moblie 5.0. I can make my device suspend then  resume it the error happen.ERROR: Power Handler function yield to low priority thread. I can't clearly understand the message.
can any body give me ...

I want to plug to x86 which running CE
usb smart card reader
i have added in the pb all the items that i need
and try to run it

I am trying to load the OS image on the MainstoneII Development
Platform.
However, I am having some problem in this regard.
Flowing if the Output on the Serial Console, when I transferred the OS

Help! When i insert CF Storage Card(Transcend 2GB 80X) to target
device, just no response.
My device has TI1520 and VIA VT6212 on PCI Bus. Now USB Storage can
work well.

I wanted to know if anyone knows what is the Load address of the OS
Image to the Flash on the MainstoneII Board ?
Any help in this matter would be highly appreciated !
Regards,

I have tried to configure Telnet and FTP services by adding both of these
to my project which is based on an industrial controller.
I have made the following registry settings in project.reg
; @CESYSGEN IF SERVERS_MODULES_TELNETD

Has anyone had a 4bit graphics driver up and running on CE5?
background:
I've run into data alignment issues on an ARM core in
GPE::EmulatedBlt_Internal() in swblt.cpp

   i have enabled hive based registry over a flash media.  Now, most of
the boot ups happens
fine....and i am able to see a \flash media\Documents and Settings
folder on the volume mounted

Platform : PB5.0
Flash 16 x 2 : 32 (NOR Flash)
Its a strange problem for me!!
In DEBUG Mode, Seems work perfectly. There was a "NOR Flash" Folder at

I have an console application that is called by a Launch entry in the
registry. The app, in turn, launches a bundle of applications on the
device. I now need to support a scenario where the user may choose to
start a different set of applications by holding a key down when

I am trying to transfer the OS image to MainstoneII Development Board
using Platform Builder 5.0. However, I am having some problems doing
this.
I am getting the following messages, after I configure the Target

I use a removable USB memory device to restore data on my WinCE 5.0
device.  When I boot the system I want to check if the memory device is
present, and then do the restore automatically.  If the memory device
is not present I start my application normally.  My problem is that it

I am trying to suspend/resume our pxa270 (C5 stepping) board
derived from mainstoneII (WinCE 5.0).
The suspend seems ok but the resume procedure hangs the system.
The startup code provide a skeleton to manage resume code but

Good afternoon,
I am working with Platform Builder 5.0 and an i.MX21 ARMV4I Development
board and am having problems trying to get any PCMCIA or Compact Flash
device to be recognised when I plug them into the single 16-Bit PCMCIA