I need a headless device with a web interface to configure it. To use
remoteadmin i created a platform on the gateway template. The remoteadmin
starts correctly, but how can i remove the settings that i don´t need or add
settings? And how can i add individual texts, pictures and ...

Hi guys, I'm using PB 4.2 to create a WinCE image for a board based on ARM
Cirrus 9315. I added Cirrus BSP and PCMCIA Driver included to my image. I
added support for CF and FAT because I'd like to use PCMCIA for reading
Compact Flash. The problem is that when I plug PCMCIA ...

I am currently using IPSM 3.7.030924 hardware is pxa255 based and OS is
wince 4.2.  I would very much like to increase the speed of reading and
writing from IPSM, has anyone tried this.
Currently I am trying to gauge speed of reading and writing to IPSM by

We have problems with GetTickCount suddenly jumping ~1165 seconds.(Win CE 4.2)
I know the problem dissapears by stubing out OEMIdle().
That is not an acceptable solution for us thou we care a lot about power
consumption.

I am trying to execute the WindowsCE minimal kernel, straight from
Flash(XIP).Reference BSP is MainstoneII.
At present, since the LAN Controller and the CF slot are not enabled, I
decided to transfer the kernel image(NK.nb0) using JTAG.

I would like to ask WinCE 5.0 kernel support 24 bits color display?
Suppose I have a MCU supports 24 bits color and display driver can
output 24 bits color to a TFT LCD panel without any problem. Does the
WinCE 5.0 kernel can output all 24 bits color to the driver for

Dear Sir
  Driver development is over ..now i am stuck ..i compiled BSP and D/L ,
but no touch calibration screen appears on the scree.
What is the procedure to invoke Touch Screen at the start up

    DM320TRM1a_1.5 says that we need "Setup the interrupt entry table base
register (EABASE)"
when initializes interrupt controller.
    There have a function call:

Dear Experts,
At present we are working on WINCE5.0 ethernet driver for AT91RM9200
platform.
My target board sends the DHCP request to DHCP server and DHCP server

Hi --
I have a question regarding SecureDigital memory.  I've noticed that
the TFAT file system implementation requires atomic sectory writes.
The embedded platform I have (PXA270) uses SD memory exclusively as the

I want to use the function of SHAppBarMessage in my application. But I
don't know how to import the required library shell32.lib in platform
builder. Can anyone help me?
thx a lot~

can i get debug messages DEBUGMSG in release configuration when we build
image in wince-4.2,or REATAILMSG macro is used for that.

I see references to the highspeed serial buffering (isr16550) and I
understand how it works.
The docs say you can use it (link it) with the ser16550 driver.
Is this also available/included for the oo16550? Is the high speed ISR in

I have set a few break points in my code. I'm using PB for WinCE5.0. I
download the code via ethernet (its not the cross over connection). I
observe debug messages in the PB debug window. I use a serial cable
connnection for this. I'm running the debug version of CE. I've

I'm trying to get Monte-carlo profiling to work. It appears data is gathered correctly, but when I end the profiling I get no useful information, it appears it can't find symbols for some reason. Please see the trace from platform builder below.
I've tried both with nk.exe, ...