We have a requirement in one of our projects where in we want an
application running on a Windows Mobile 5.0 device ( i-mate JASJAR ) to
receive IP packets on a UDP port and a server running in LAN to send
the UDP packets to this application. The device is connected to one of

Platform:samsung2410
SDRAM 64M
now I will expand my SDRAM from 64 Mbytes to 128M bytes , how can i do  it?
I searched the SDRAM  from my platform,

I am very very new to winCE.NET.I have Installed winCE 5.0 licensed version.
I have followed proper installation steps and i have installed only the x86
emulator.
As per the tutorials given in the MSDN i have followed the steps to build

   I am newbie in RNDIS. Lately, I have to complet RNDIS on WinCE50.
I try to read some MSDN about RNDIS and USB Spec. 2.0.
But I have no sense to build it.
Somebody could give me some hints and reference?

Does anyone know which NIC card is used by MS Virtual PC 2004?

I've a very freaky problem with the RTL8139 driver on Geode:
I connect my RTL8139 over cross cable to an XP machine. On XP, the network
adapter has 2 IP Address in different networks.
I start a flood ping from XP to the RTL8139 (5000 bytes), the RTL8139 is

Hi, all.
In my device, there is one build in nand flash. The registry of the driver
is below:
[HKEY_LOCAL_MACHINE\Drivers\BlockDevice\FlashDrv]

I'm developing a SD card driver for platform PXA255 on WinCE 4.2. I can see
SD card partition in Storage Manager control panel but its mounted. When I
try to mount, it gives error unable to mount the partition. The following is
the registry I'm using.

We want to know Whether MSFlash FMD driver support partition for Nan
flash.
Anybody giving the solution for the above issue it would b
appreciable.

I have migrated a PXA 255 BSP and few drivers to 5.0. SD card driver is
giving me trouble:
I see that the loader is able to detect the card and make registry
settings for the driver, however I do not see the SD?MMC folder show

Hai,
I am planning develop a boot loader based on CE 5.0 x86 BIOS boot
loader. Is it possible for me to include the etherboot source also
along with this BIOS boot loader to download windows ce image.

I have modified WinCE5.0 MAINSTONEII bootloader eBoot code to my
emulation board, that  ethernet chip is SMSC91C1111. When I try to
connect to the PB, it can't get response.
static ip

What does BSP stand for?
Mhaxx

How to use PB5 to build application which supports ArmV4 ? Applications
which were built using "ArmV4I" can not run on  ArmV4 device.
Jemmy

Hello,
I want to add a 16C552 chip for my EP931X board. What should I do to
build a wince driver for it?
1. Where should I start?