Hi!
      I want to add one task in KERNEL scheduler how can I ..??
I mean at every 10ms i want to check Key Input stauts or Touch Press ,rather
than using H/W interrupt i want to do it by polling using KERNEL scheduling.

I am facing strange problem in WinCE5.0.whenever I do makeimg I am getting
the
"makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec).
makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec)."

I have migrated IPSM from 4.2 to 5.0. The build has no problems and on
startup, the InitIPSM seems to run fine. Though, there has been one
thing that has been a show stopper here: the shadowing of the root
directory to \IPSM is not taking place.

Porting my BSP (based on the XSC1BD BSP) from 4.2 to 5.0 gives me problems
with both UART and USB. No communication works afterward even if the build
seems OK. (Both worked in 4.2.)
Is there anyone having the lubbock.cec file?

Why is it that Google's "microsoft.public.windowsce.platbuilder" newsgroup
searches return more hits than MSDN's   "Discussions in
windowsce.platbuilder" search option?

   I build a CE4.2 image, the NK.bin is about 16MB, it works good with the
embedded computer we have(133MHz 486DX2 CPU,64MB DRAM )
, then our customer want multi language support, I  add some languages into
it, but when I build it, I have to set build option to ""Enable image ...

I've ported Windows XP driver of a WLAN station device to Win CE.When
the WLAN device is inserted to WinCE OS, the driver will get loaded and
wireless configuration GUI will appear. And we can connect to AP using
this GUI. My question is, is there anything to do in my miniport ...

hello everybody ,how to get the capacity of battery in wince program ?
thanks!

Just looking for other suggestions.
In our desktop windows application, we scale our printing to fit the printer
using Transformation functions such as SetViewPortExt and SetWindowExt which
are not supported in CE. I see that if I change the printer resolution in CE

I looked back the posts, but still don't get the clear picture yet.
I am using Xscale board on CE 5.0.
I am trying to connect two CE devices with USB. On  the client,
there is USB Client inferface from Xscale and we have the driver

     Hi
     I already added: "FAT FILE SYSTEM"" ATAPI PCI/IDE STORAGE BLOCK
DRIVER"" COMPACT FLASH/PC CARD STORAGE[ATADISK]"" SECURE DIGITAL/MULTIMEDIA
CARD[SC/MMC]"

I got a problem when I build the BSP features for Tiny Kernel platform, the
build log as below:
BUILD: Compiling d:\wince420\platform\ceb255\drivers\wavedev directory
BUILD: NMAKE.EXE  -i -c BUILDMSG=Stop. NTTEST= UMTEST= NOLINK=1 NOPASS0=1

I am doing a USB wireless driver in WinCE 5.0.My problem is that i am not
getting a proper adapter name when i do a ipconfig.Where as the description
field comes as proper which is same as my instance name.where as the adapter
name shows nothing.

I am writing driver for Irda remote controler.
my bsp is samsung 2440.
irda sensor is connected to the gpio pin.
my problem is detecting the time between raise and fall of gpio pin. since

Does anyone know how to enable SDIO so that sd memory card or wlan card on
INTEL pxa27x dev board (Mainstoneii) / WinCE 5.0?
I have add the following options from catalog:
1.INTEL PXA27x dev platform->Device Drivers->Security digital controller