Excuse for my bad English...
I use hive-registry on my board. I read image from NAND-flash, store it
in RAM and then jump to image. NAND flash is formatted as FAT in
bootloader. Fisrt 8 blocks is reserved and marked as bad. MBR locates

My platform is Intel IXDP425 based system runing in CE5.0.  (just
migrated from 4.2)
I have a question about CETK Storage Device Block Driver API Test.
First, there is a bug in this test suite. The command line parameter

My device was running on Wince4.1, I have ported the HAL/Driver to work
for Wince5.0. After integration PCMCIA CF card is having one problem.
It is not accessible after I Press suspend/ Resume two times. If any
one is having some idea about the cause of this problem please  respond

we are working with a Xscale based platform (PXA250) and PB 4.2.
We seem to be able to add the power button, but instead of being the button
it should be, it is a button that is normally being used for accessing the
menu.

I'm trying to stop the debug messages on the COM1 port of my CE 5.0 board,
and have tried to disable it by setting the loadcepc switch like this:
Loadcepc /C:0
but all I got is this error message:

Mainstone PXA270 WinCE5.0
I'm trying to resume usb serial function after suspend.
I have done these modifications:
1) correct bul_usbfn.cpp BulUsbDevice::ReInit() with inserting parenthesis

I am working on geodelx db800 board and i want to port wince 5.0 on that
board.I have downloaded the bsp for this board and made an image with the
same .The board has realtek 8110SB as an integrated ethernet card.When i try
to do ethernet boot  i get the following messages serial ...

my task is to port WinCE 5.0 to a x86 based target. The target contains a
RTL8169 network chip. But I can't find a eboot.bin version for this chip. Does
anybody know if there is such a version of eboot available? Or is it possible to
download and debug via USB (in other words: is ...

I have been looking through all the old posts and to no avail.  It does
not seem there is a situation that is like what I am seeing.  From what
I can tell, storage manager or device manager is even being loaded.
I almost seems as if the boot hive is not correct, however if I look at

I mount a network folder from my workstation (XP Pro PC SP2 + Updates) into
my CEPC (WCE500).
My test program calls only loadlibrary() an the dll is a test library with
just one function.

I have hive stored on Intel P30 flash. My startup.wav sound seems to be
distorted every so often.  I don't have the Flash as my root though just used
for hive. I have a KITL build, anyone any ideas. Using V5.0
Thanks

Down to ram run,this is OK:
Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at
18:25:00
ProcessorType=0920 Revision=0

      We use GPIO pins to connect to our external device.
      Now, we want to reset that device via GIO pins.
      Could someone tell us how to control GPIO pins by SW?
      Thanks!!

Hi,
I have seen the file file winceos.bat on the directory
WINCE500\PUBLIC\CEBASE\OAK\MISC and I want to know when this batch file get
executed.

i going to do power manager in Wince5.0, but I don`t know to use PM.
Please could someone tell me using PM.