I run my WinCE development system on a virtual machine, which makes it impossible to use
the emulator platform for testing.  So I created another virtual machine, meant to replace
the emulator - it brings up eboot and away we go - almost.
The virtual machine presents the NIC as an ...

I'm going to develop an application using direct3d mobile interface based on
windows ce 5.0.
I wonder  PDAs based on WindowsCE 5.0 support applications using direct3d
mobile interface as default.

I'm porting Windows CE .NET 4.2 to run on a board based on Lubbock. The
main differences between my board and Lubbock are the Ethernet
Controller, the FPGA and the SA1111. My Board has a SMC LAN91C111
Ethernet Controller instead of SMC LAN91C96 found on Lubbock. Also, my

I am trying to make LAN91C111 NDIS driver from SMSC to work with a
custom board. My Physical Address is 0x0c0000000 (ChipSelect 3) and i
have a bootloader with KITL already working.
The instructions from the SMSC driver tells to configure these registry

I am currently getting an error when installing PB 5.0.
The install brings up the dialog: "Unable to initialize the catalog."
when installing and after the install is complete the same dialog pops
up when PB is run. I have tried full reinstallation and the same dialog

  I do not know how to support 64x64 size cursor for display driver in
wince5.0, and need add some code or variable to BSP?

I am working in  Pxa270 with Wince5.0. After download the Nk.bin in Sdram,it
cant jumb to image.  i am getting the given below in my hyperterminal.
ROMHDR at Address 80100044h
Download successful!  

I'm trying to port a rather large appliction to WinCE 5.0 using Platform
Builder.  I'm just evaluating WinCE at this point, and so far it doesn't look
like Platform Builder is designed for large, multi-directory applications.  
So I moved all the source files to one directory.  ...

When I connect device with PC by ActiveSync, I found system time in device
will be changed according to Time Zone Setting.
It seems time sync is done when ActiveSync is finished.
How to prevent ActiveSync from changing  the system time in device ?

Ok, I first installed Platform Builder.  Turns out you can only compile
trivial applications with Platform Builder.  So I installed eMbedded Visual
C++ 4.0.  Then I made a SDK from platform builder.  When I try to install the
.msi file it tells me that "Software development tools ...

When CE boot-up, I must hit the SIP icon on task bar to show the visual
keyboard.
I need a function that SIP shown automatically when CE boot-up.
Is there any way to do this?

What is the meaning of below error while building and sysgen Mobile Handheld
( windows ce device)
Thanks
Error - cannot open input file

I have a simple "C" application running on my device that needs to detect if
ActiveSync is connected and active.
I know the info is in the docs somewhere but all I can find is info on
detection of connections from the desktop side.

I found a few posts concerning the difference in explorer performance
between 4.2 and 5.0, the last one dated more than 6 months ago. It
takes about 3 times as long to show the folder contents on 5.0.
Is there any news on this?

Does anyone know how to build command line tool to run on windows ce 5.1
build 1702? can we use Platforma builder to build the cmd.exe ?
thanks