I have a Windows CE 5.0 image on a system that works fine until power
is cycled with a USB thumb drive left attached.  The system enters a
state of constant reboot with the USB drive attached.  Removing the USB
drive results in an eventual successful CE load (it may take several

I want to install WinCEPB50-051231-Product-Update-Rollup-X86 on my computer.
But when the install going,there is a error appears,it says:"The cabinet
file'CE_1.cab' required for this installation is corrupt and can't be
used,this could indicate a network error,an error reading ...

Is it possible to download a run-time image to a flash card in a device from
platform builder 5.0 (the download by connecting the device from target menu
doesn't save the image on the flash) ?
Thanks

  I want to use SIP control in my OS image ,in this connection i have 2
questions to ask
1. I want to use same default SIP control  but i want to change GUI of
SIP(Little bigget),rest of the things remains unchanged .Only changing SIP

I have a working platform (and nk.bin) and am trying to build the SDK. (I've
done the procedure before without problems, but now it fails).
No *.msi is generated.
The output I get in the Build-SDK-output window :

 I am working on a porting of Windows CE.Net 4.2 to a board of
Freescale MC9328MX1 which was design by myself with Intel strata flash
instead of the original syncflash chip of the Motorola reference
design. But, I found that the display refresh speed is much better when

I connected a MMC card to PXA255 directly and run well in most case.
But when I suspend the winCE and awake it,the stange thing happened:
In the explorer,I can saw the MMC folder and it`s sub folder and files,
but I can`t delete or create the file(folder) in it.when I excute the

When I add the BSP of SMDK2440A with importing the CEC file. By
platfprm Wizard, I new a Internet Appliance template. Then
Sysgen.........
But error occured in Build.log:

Hi, everyone!
I have Wakeup problem with MainstoneIII BSP.
I use Platform Builder 5.0(PB 5.0).
Device goes to sleep successfully.

I'm porting Windows CE 4.2 XSC1BD BSP to a board based on Lubbock. This
board has all features of Lubbock (It has an FPGA that maps all Lubbock
Peripherals).  The main difference between this board and Lubbock is
the Ethernet Controller. The board I'm working has a SMSC LAN 91C111

Dear Sir,
I use PXA27X and WINCE5.0 to develop my project and use CF card for
storage.
Step-1 : I plug a CF card which is NO driver into my system. The WINCE

I am in the process of migrating our wince 4.2 Xscale PXA250 BSP to wince 5
and have encountered the following warnings and errors, If I omit this
driver from the build I get similar warnings in drvlib .
BUILD: [01:0000000079:PROGC ] Compiling .\ne2000.c

I have try to download the "Windows CE 5.0 Platform Builder - Yearly Updated
Full Update
Package (through 12/31/2004)",but the link shows "The download you requested
is unavailable.

I am a newbie of CE.
I have some questions about QFE.
I bought CE5.0 on february 2006. I knew QFE recently.
And I have download the full 2005 updates,the January updates,the february

       I am just trying to export an sdk from winows ce5.0 to enbedded
visual basic3.0... as i referred in the help ,the options given in the
help are not available in wince5.0 to export the sdk.. is there any
other way to export an sdk.. just help me out regarding that to export