am in pb42.net, how to program set hiding the taskbar and
start menu automaticly. As also the taskbar is not always on the top.
thanks.

i want to write a int0 test program,when i push the init0 button will
output "nThis is INT Output!......" (SMDK2410+PB5.0)
DWORD dwIrq,dwSysInt;
INT0_init()

We are working on a new hardware design, PXA270 based and using Windows
CE 5.0.
The PXA270 supports USB Host, Function and On-The-Go. We would like to
be able to work as host and function (on the same connector). What we

hi,
I am building a Windows CE System Image using PB 4.2. The board has a RAM of
64MB on size. I use the config.bib provided by the OEM which is somewhat
diffenent from the common configuration.

i wanted to increase the number of serial ports, by using USB port in
my board, how can we do that any 1 has idea?
i use winCE 5.0.
well i will use a usb to serial convertyer device, but for that i

I see a problem in attaching USB-drives to my target.
From a set of 40 test-keys I have 2 that are often detected as a USB1.1
device.
The driver starts 5 HubStatusChangeThreads :

I have a PocketPC device which consists of PXA255, LCD and Davicom
9000E ethernet controller, running WinCE 5.0
I am having a problem that the WinCE doesn't recognizes the
disconnection of the ethernet cable.(The icon the the right-lower

When we try to install an application (CAB) on our target device
(PXA270 XScale) we get the following dialog box:
Setup failed
The application cannot run on this device type.

Pocket PC 2003 permit to change separation between storage and program
memory. Is it possible with Windows Mobile 2005, too?
My WM5 seems not to permit it, in fact Start -> Settings -> System ->
Memory -> Main only shows storage and program memory quantities, but I can't

Can anbody tell me where I can find the source to wceload in PB? I've
done a search and can't find it anywhere.
Thanks
Paul

In microsoft's help,
both of them are macro definitions that specifies library (.lib) files
to be linked,
so what is the difference?

does somebody know whether I can use the FPU of a SH4 in an ISR????
I am using a SH4 design. The compiler supports the FPU, this is fine. But
when I debug the processor status register in the ISR, I can see, that the
FPU is disabled.....

   when after the bootloader's OEMLaunch, run the nk.bin
jump to a address. to run the wince.
can anybody tell, the address is the function's address.
and which function ?

I want to ask if a problem with USB mass storage driver in Win CE 5.0
had been solved. I red all messages posted in this newsgroup but I did
not find any complex solution. We still have problem with some USB keys
on PXA270 platform.

Do CE programmers have greater hair loss than everybody else?
I have looked at old group messages and the documentation and have come
to wits end.
I have been struggling to get the hive registry to work on my Advantech