Sorry but I'm a newbie in windowsce 5.0...
I have some question just to start play around the ce world...
1) I would like to start with simple CE 5.0 installation (just the OS)
and then load it into the emulator on the PC...

   What is the use of BINOFFSET in memory.cfg.xml? Is it useful?

I build a debug version by WinCE500,
the GPEFlat::SetMode is just as below
SCODE
   GPEFLAT::SetMode(

Can anybody tell me how to custom start screen (bitmap show) when we start
WinCE ?
I think maybe bootloader can help me , but I can not find valuable
information for this topic in MSDN.

how to config config.bib! I want to reduce the size of the nk.nb0?
the config like below:
MEMORY
   RESERVED     80000000        00008000        RESERVED

All,
Does anyone know of a way to get PB5.0 to automatically copy particular
driver dlls to the _FLATRELEASEDIR say during the PreMakeImg phase. It seems
like a catalog file should do it  but so far I have not been able to get it

if I stop the media player(not close),the current immediately fall
down,what's wrong with it?the media file is WMV file in system flash or CF
card.
regards.

Dear Greats,
My Intel PXA270 board doesn't have Ethernet port, only serial port.
Serial boot loader is available for PXA270. My objective is to do
Kernel debugging using the serial port.

Has there been any discussion about DST support when the start/end dates of
DST change in 2007 ?
The code for this appears to be handled in the private tree (timesvc) in CE
5.0, so altering the dates doesn't appear to be something OEMs can

How to make sure that new code in OAL is being used rather than the code in
the common directory.
In cloning BSP article, it is quoted,
"$(_TARGETPLATROOT)\lib\$(_CPUINDPATH)\i486oal.lib

I am running CE5.0 and PXA255.
I have storage card(CF), I can use program to Read\Write it, format the
entrie card,
creatpartitons , they all works fine, but when I tried to format a paricular

Hi,dear all:
   I used the SDMMC driver which came from XSC1BD on WINCE5.0,but I met
some problem.
   platform.reg setting:

I'm porting Windows CE .NET 4.2 to a Lubbock Based Board. My board has
a few differences between Lubbock (Intel DBPXA250). On of them is the
USB Host Controller. My board has a Philips ISP1362 USB Controller
which is fully working on Linux.

Can anyone tell me how to enable USB ActiveSync on PXA27x's MainstoneII.
Currently I use Activesync ok via Serial port (Com 1).
Can anyone help?
Lptguy

All,
I am using a 5.0 CEPC on a network that is populated with Windows XP
machines.  I would like to share the files on CEPC via SMB. However the XP
machines use fixed IP addresses that are in a totally different subnet than