I build an ARMV4I debug version in wince 5.0, it can successfully boot
up form board, then
if I type "s cemgrc.exe", then KITL will output a message as below and
not response again,

Hi, I am wondering if it is possible to add a Default Device as a
target to EVC4 for WinCE 5.0 standard sdk. I only have an emulator as
an option for this SDK..
Thank You

i am use wince50 !the help of the system can not shut down !there is no
"X" in the help windows!

My OS image is based on the gateway template. It includes the timesvc which i
want to use as a client.
The timezone of the client is GMT +01:00.
The timezone of the server is GMT +01:00.

For my device winCE4.2 ,in BSP we have 3 UART channel hence three com ports.
Com port name givne as COM1,SER1,URT1 ( all these settings are in
Platform.reg i.e. COm port releated registry values)
My problem is I want  to Rename a comport i.e. SER1 to COM2 ..How can i do

Hi,  
I created a custom platform for our industrial device (Platform Builder 4.2), but I can't figure out which settings and modules to use in PB to control the backlight on/off after a predefined user inactity time.    I found in PB help the following registry settings that I ...

Anyone know of a good book on WindowsCE networking?
Thanks

is it possible to configure the ftp server with different access rights for
each user?
I like to allow one user write access to a given directory, but another user
should only have the permission to read.

Is there only '1' DefaultPage entry?
Or, can each virtual path have its own?
Just this?
[HKEY_LOCAL_MACHINE\COMM\HTTPD\]

I've got a PXA270 device that I'm trying to use Remote Performance Monitor
on. I've built the platform with KITL enabled and CE Target control. The
image boots and functions as expected. I then start the Remote Performance
Monitor and select the default device. It connects as ...

The driver that can be downloaded on the Linksys web site is for Pocket
PC.
I succeed in using it with Platform Builder on a SH3 device by
following this steps :

With Win CE 5.0  and the FTP server I have the following question:
Is it possible to set user permissions per directory? For example, the
home directory for user A is \cars to which the user has read/write
access. But \cars has two sub-directories \old (\cars\old) and \new

I found one previous post about these, but wondering if others might have
more info on these undocumented functions used in some of the sample services.
If RELEASELOG is set, these functions appear to still be enabled in the
retail build, so maybe they can be used to make a nice ...

Hi ,
I have a problem with a PCMCIA Card.
when I plug it in the pocket reader , It's recogneized as
UNKNOWN_MANUFACTURER-0000.

Why isn't there a RTL8139 retail Ethernet driver in Windows CE 5.0? Or is
there?
There is a debug Ethernet driver in
\PUBLIC\COMMON\OAK\DRIVERS\ETHDBG\RTL8139 but no RTL8139 in DRIVERS\NETCARD.