I am getting strange error during sysgen phase
Build.log dump is here
----------------------------------------------------------------------------------
Res2Res: Using F:\WINCE500\public\common\oak\Bin\i386\R2RDUMMY.DLL for temp

am fresher in wince application development . We are concern
about developing a streaming client in wince 4.2 & 5.0. Here i have
some
problem i faced. Plz guide me regarding the following cases

Hi;
I cloned new ebootloader bsp And I created new tiny kernel platform
workspace with my new custom BSP.
When I build Build and Sysgen MyWorkspace I get error "Please define your

The Platform Builder BSP that I have by default is designed for
QVGA Portrait Display.
However, I am using a QVGA Landscape Display.
I encountered problems that quite many applications (eg. SYSTEM

Hi£¬dear£º
wice50 and pxa255 base on XSC1BD,and XSC1BD migrated from wince42
I built a image with enable "Enable Eboot Space in Memory"and"Write Run-time
Image to Flash Memory",after the nk image burned into Flash,the system can

 I am developing USB mass storage function driver(PDD) in CE5.0 by modify
net2880 driver.
 Now,
   1.wince has take cf card as DSK1

I don't know if this is the right place to ask, But we are trying to use
RasDial and somehow fool Connection Manager that there is a valid connection.
I had the following ideas
1. a CSP like CSPRAS.DLL or CSPWAN.DLL. But could find no info.

Hi,
I created a custom platform for our industrial device (Platform Builder
4.2), but I can’t figure out which settings and modules to use in PB to
control the backlight on/off after a predefined user inactivity time.  

I am trying to develop a screen saver like facility for my WINCE Image i.e,
after a predifined time of inactivity the LCD backlight should be OFF and
on some activity like a touch on the touchscren the backlight should get ON
I reffered the wince documentation  "activity timer ...

I want to include
SYSGEN_DISCOVER_SERVICE
The files are located at
%_WINCEROOT%\Public\Servers\Oak\Samples\UPnP\DiscoverService

We're currently starting migrating from a mixed eVC4/VC6/VC7.1 environment,
where CE 4.2 is used for eVC4, to a unified VC8 environment and have a few
questions.
1. Installing PB5, can I use the same machine? I know that PB4.2 lacked

In WinCE5.0, I built Germany version CEPC image.
Displaying Germany character is ok.
But I have a question about how to typing a Germany character?
Is there a Germany IME in the Windows CE?

  I have windowsCE5.0 installed on my system...I have a platform built
for emulator bsp which was working fine till yesterday.....Today i did
a buildos/build and sysgen and from then onwards i am getting the
following error in the build.err file

I Have hardcoded the volume setting in the audio driver of my wince image  
to be maximum (It is a ucb1400 chip Master_volume set to 0x3f3f in PDD files)
however when i increase the volume through the control panel volume settings
it increases.

I am porting an existing boot loader to WinCE 5.0 (for ARM4I cpu-core).
The existing boot loader is written for Linux, and it works fine for
the embedded linux.
I encounter a problem at very early stage -- my startup.s can jump to