Hi,to any who helps me to solve this problem:
I am developing the Magneto with RIL function inside. Because our EVB
is under debug, we must run the Mangeto 5.0 built by "device emulator "
for wavecom RIL to platform builder.

I used PB 4.2 to build a Windows CE System for Samsung 2410 board.
The default display resolution is 640*480. Then I wanted to change it
to 800*600.
I modified common.reg file:

We are developing a Bluetooth device with MS Window CE 5.0 Bluetooth stack
and are now seing a huge problem. We have found that the IObex::BindToDevice
method and the BthAuthenticate seem to be blocking calls until the peer
device sends an accept or reject. Yet we have not found ...

I am using platformbuilder for winCE5.0
I want to make activex with MQE functionality,
but there is no activeX in "New project of file menu" in platform builder,
is there any way I can do this ?

As we know, we can use "build" command to compile own project in the
Platform builder. But i don't know how to set optimization level--between
performance and size.
Thanks!

I am stuck with one Problem. First let me tell you about my
environment. I am using Intex PXA270 Processor & Mainstoneiii USB
function driver code using wince 5.0.
USB client driver is working Fine after hardreset even it is working

We want to develop a web-based application using IE for CE, which needs
access to a few local dlls on our PXA255 / CE 5.0 device. As a server
we want to use Apache with PHP-MySql.
We've been looking around a bit but we still don't see what to use. At

I've looked at a few posts and am still confused. Before I go off and
do a lot more digging does anybody know if htmlview.dll is available in
CE5.0? Some say it is part of "The Windows CE HTML-based Help system
application" (peghelp) some say it is just not available.

Device is PXA255 based running CE5.0. Problem is similar to issue
mentionned on topic "Device wakes up every 10 minutes" (21th of March).
Short description: device enters suspend mode and on 300th count of RTC
clock (5 minutes), device resumes automatically. When setting

I build the nk.bin of debug version ,it is 31m,when I download it ,it goes
normally until having downloaded 28.6m,it hangs .I get nothing useful
information from debug serial and get "Download failed review your download
service selection and configuration" on PB.

I have complete BSP(ARMV4I) which is compiled and working well on the device
. This working BSP is wincE4.2 Based .
Now i have got WinCE 5.0 platform builder (Trial version) . To do porting
from WincE4.2 to WincE5.0

MANISTONEIII has two keypad drivers. What is the difference? Which one should
I use?
regards

Has any one encountered the same problem before? Any help will be
appreciated!
OS: Windows Mobile 5 (AKU 2.1)
Platform: Mainstone II

I've built my kernel fine (on PB5), but when I try and generate an SDK I get
the message "It is recommended that you build a run-time image before
building an SDK. Otherwise, the build process for your SDK might not succeed.
Do you want to continue?"

I get this error "  Error: only 4k page alignments supported at this time,  
found in module system.data.sqlserverce.dll
Fatal error hit, exiting... "
when i try to add the file system.data.sqlserverce.dll (SQL Server 2005