Does anyone know how to get the physical flash block size from a Compact
Flash card?
Without knowing the card manufacturer/flash/controller (etc) is there any
way of enquiring this information from the card?

in my platform I've just configurated HTTPD services; in project.reg in
HKLM/Ident I've changed the field name but if I request
http://localhost/remoteadmin/DeviceConfig.htm, the Device Name field is empy.
Why ?

We're trying to test our application running under CE 5.0. It was previously
working under CE 4.1, and we don't do anything fancy, so generally its been
working fine in CE 5.0.
I've hit a snag, and I don't understand why this one case would be odd in

I'm migrating a device from Windows CE4.2 to 5.0. With the device we use a
command prompt program that allows a user to set a Network Share using
WNetAddConnection3. The point of the program is to be able to set a username
and password and then add any number of network share (on ...

I am using CE 5.0 with a VIA BSP on a proprietary x86 platform and get the
debug output below at boot and at various other times.  I know that these are
the IOCTL_HAL_GET_RANDOM_SEED and IOCTL_HAL_GET_HWENTROPY codes respectively
but wonder what is calling them, why they are ...

I have a question concerned about using GPIO_0 of pxa270 as interrupt
source. My external miniPCI device is connected to target pxa270 though
VLIO bus and the interrupt pin INTA# is connected to the GPIO_0 of
pxa270.  From mannual , I came to know that GPIO_0 & GPIO_1 (FIQ) are

once more I want to ask if somebody knows where (which brand) it is
possible to buy the Sychip WLAN6060 SDIO card ?
I want this card because as far as I know the driver is included in the
platbuilder 5.0 or not ?

Hi, all,
I got an error message on my screen "error with null, (code: 0x80cc000c)".
Does anyone know what is it complaining?  Is this gwes error?  Null display
driver error?  Explorer error?  I am in the dark cause I can't get more

I am a newbie to WINCE and i dont have any knowledge of E10A...
but i want to debug Wince using E10A.....can any one guide me or give
me the link where i can find the help..........
please help me out its very urgent

Has anyone assigned a static IP to an adapter that already had an IP
from DHCP?  If so, did you run into any issues with it?  Are there any
gotchas to be aware of?

    I have a question about PPC  extern card (SD card ,CF card,T
card...).Could you tell me PPC support the card of capacity exceed 4GB?

This is continued from here (I could not post because it is more than
30 days old):
http://groups.google.com/group/microsoft.public.windowsce.platbuilder/browse_frm
/thread/7f3f3519e53feb2d/75180168413bbd25?lnk=st&q=Networked+Media+Device&rnum=1
&hl=en#75180168413bbd25
I had the same ...

I am struggling in writing a device driver for multifunctional pcmcia device.
It has two functions:
  - function-1 is a uart, which uses IO (8 bytes) only
  - function-2 is a USB host uses both IO (32 bytes) and memory (2k bytes)

Does anyone know if there any API function that can turn on/off the
SDIO module?
Thanks very much.

I am getting the following exception which froze my device completely.
Here is a debug output of a couple of instances of the failures I am
having; any suggestions would be appreciated:
-------------------------- 1 ------------------------