I made some changes to the file
wince500\private\winceos\coreos\nk\kernel\arm\mdarm.c. But could not
build it thought PB. Is it possible to compile those files.
Thanks,

MY QUESTION WHETHER NK.EXE RUNS IN KERNEL SPACE OR USER SPACE.SINCE ONLY 32
PROCESS ARE POSSIBLE TO RUN AT A TIME ,THERE ARE ONLY 33 SLOTS OF WHICH SLOT
0 IS BEING USED BY ACTIVE PROCESS AND SLOT 1 FOR ROM BASED DLLS.BUT ONLY 31
SLOTS ARE REMAINING HOW COME 32 PROCESS RUN AT A ...

I'm using a PXA270 board with Windows CE 5.0 to communicate with USB
boxes for data acquisition.
The interrupt communication between the box and our board runs fine.
I'm even able to issue an LPSET_REPORT to the USB box without problems.

I want to start a bat file at windows ce startup. I tried to modify
"HKEY_LOCAL_MACHINE\init" in the registry but did not work out. I suspect it
only accepts exe's. Then I have tried to make small exe application and
launch a bat file, but have not succeeded there either. My ...

If I create a boot loader (eboot) using platform builder, can I download it
using URT?

I am working on a via cn13000, it's a set top box kind of project.
I get the tv out working most of the time.
however, when i use the ce5 media player to play a video stream. the out put
is ONLY shown in the CRT. the window content in the TV is a grey box.

I'm looking for a qfe that was mentioned in a KB released this week  :
http://www.kbalertz.com/Feedback_916455.aspx
Is there a way to download a specific QFE or do I have to wait for the
monthly release?

I'v just create my Windows CE 5 platform. I've included in my platform the
driver of M-System for DiskOnChip. Why in explorer does not appear DiskOnChip
disk ?

There are two  dialog windows that occasionally pop up and I for the life in
me cannot find the .rc file for them, the first one is the privacy alert and
the second is a security alert window  telling you that you are about to
view pages over a secure connection.  I need to ...

Hello, we are developing a platform based upon the Cirrus Logic EP9315 ARM
processor with CE 5.0. Although the CPU has an RTC it does not have battery
backup of the RTC so we need to add an external RTC. Are there drivers
available for an external RTC, like those from Dallas?

I've got DMA working on the PXA27x board, but I have to admit I really don't
understand every aspect of it.
Since I am using SPI, I am using XLLP_DMAC_SSP_1_TX(=14) and
XLLP_DMAC_SSP_1_RX(=13) as devices and I have hard coded DMA channel 1 for

I am writing a miniport driver. To write data to the card I use DMA, would
it be wrong to use OALVAtoPA to run DMA directly on the buffers in a
NDIS_PACKET?
OALVAtoPA seems to be reserved for the OAL layer, does anyone know how other

I am a new bie to Bluetooth and Microsoft Windows CE bluetooth stack.
I have the following question.
I have my own blue tooth stack.
I would like to use this on stack (profiles, L2 Cap,SDP, RFCOMM )

I cannot get my device to enter Suspend mode automatically (as per
Control Panel / Power settings) when it is on battery power.
Here is what happens:
I have implemented my own battery driver PDD layer to be able to read

New, sorry
Alchemy AMD DBAU1200
mipsii
WinCE 5