I need to add in my platform a registry binary value composed by more than
200 bytes, how can I do that?
I tried simply adding the following:
"ActiveSettings"=hex:B4,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ...

I would like to know how I import my SDK to Visual C++ 4.0?
I use the Platform Builder 5.0.....
thanks a lot...

i have problems with active sync.can u pls help me in these issues ?
1. when we attach our device with desktop thoriugh serial cable,
normally "repllog.exe"   should automatically start and connection
should automatically be set up,  if i m not wrong. but it is not

When i try to run my own applications on imx21 lite kit (CSB535FS)
to display some thing on LCD it is giving segmentation fault.when
i run example programs given in package they are working fine.
How can i access to frame buffer .

We are currently developing a new Hardware based on the PXA270 that closely
follows the Mainstone II.  We have perfectly stable Wince 4.2/5.0 BSP that
we have developed over many years for our PXA255 based board.
I have had a brief look at the MainstoneII BSP supplied with Wince 5 ...

   I have a device based X86 platform. my X86 motherboard has one ethernet
port
   and five PCI bus sockets, I make use of five PCI bus sockets as the
ethernet port

Folks,
My name is Jim March.  I'm an activist in the area of electronic voting
reform and I need to find a credible expert in Windows CE *fast*.
There is a serious flaw in the certification of the Diebold touchscreen

I just fixed some things in the USB host driver for the Au1100 (included in
its chip support package - CSP) and also some board-specific adaptions and
now wonder how I'm supposed to separate those changes from the common code.
In particular my problem is that since there seems to be ...

on PXA270 datasheet,GPIOX INT is "GPIO_x 'OR' of the GPIO edge detect
(except 0 and 1)).
Now my 'edge detecting' is more than one(they hold different SYSINT).when i
receive GPIOX int, i can distinguish them from GEDR.As you know,In

I am new to WinCE and I have a problem about the display driver. Does
WinCE 5.0 supports 12bpp display?(I can find 16bpp, but not 12bpp). If
not, can anyone suggest that how can I modify the display driver to
accomplish this task? Thank you for your help.

HI,
My USB client enumerate as RNDIS, and But it does not connect to PC
automatically on CE5.0 .
we were able to have USB RNDIS activesync on our mobile 5.0 device but fail

Thus far I have been able to develop, debug and deploy Compact
Framework 2 applications on my target CE5 machine using VS2005.
I haven't found much on writing build files (sources or makefile) that
could work consistently with other C++ based projects in platform

I'm a application devoper for a Windows CE 5.0 device. The applications we
are writing contains UI with several dialogs and which also supports
localization of several languages like english, french, germany, polish,
turkish, russian and etc.,

I'm a application devoper for a Windows CE 5.0 device. The applications we
are writing contains UI with several dialogs and which also supports
localization of several languages like english, french, germany, polish,
turkish and etc.,

After successfully downloading the OS image on the PXA255 board, we are not
able to connect to the target device.
The last message shown on the hyperterminal is
"Download successful! Jumping to image at physical 0xA00B9000 through stub