Could anybody kindly help me with the issue below?
I'd like to make a simple application on CE device to send/receive  some raw
data to/from my desktop thru a USB link. (So I need to make a simle
application on PC side as well).

  My device is about s3c2440, and the BSP is SMDK2440, so My
bootlaoders are nboot and eboot.
   Formatted by the eboot, the nandflash in my device has two
partions:BINFS and FAT32, the BINFS part is used to store the OS image

i am developing GPS system.I must customize wince shell.One of simple way is
to use map application software(a exe file) in SD card as shell.Map
application software is too large to be included in the NK.bin.But it seems
only exe files included in the NK.bin could autorun by ...

I use an USB Keybord/mouse, when my OS image is launched windows CE.
Net 4.2, don't detect all my pluged USB peripherals. The only solution
that i found, is to disconnect and re-plug them after 2 seconds for be
detected by my OS.

In startup.S, what's mean STARTUPTEXT and TEXTAREA?
I can't find the description in MSDN.

I have a problem to add the ActiveSync function to my CE system.  I used the
template Mobile Handheld in Platform Build which already inlcudes the
ActiveSync feature.  Then I added the BSP drivers for USB client and Host,
network, etc.  And the image is built successfully.  The ...

When I try to connect to the Emulator via "Target | Attach Device" menu
in PB 5.0, it says:
(CoreCon)  17:45:09 08/22/2006:    Failed to co-create service host!
(CoreCon)  17:45:09 08/22/2006:   Transport service failed to connect

Hello Everyone..
I want to know one basic thing regarding platform builder keeping our
requirement in the centre..We are planning to purchase the platform
builder for windows ce 5.0 OS. Our aim is to write the device driver

I believe that I have seen somewhere that CE 5.0 does not support ACPI.  Is
this correct?
Is is possible that a VIA BSP would have support for this?  (Unfortunately
they don't provide much documentation or source code for their BSPs)

I'm building an im age for PXA255 board using WInCE V4.2. I have an error
message
saying Missing Ordinal 349 in coredll.dll. Sysgen variable missing. How do i
find out

I am trying to get the KITL to work through USB RNDIS on an Intel Mainstone clone based on PXA270. The boot loader connects to the host and downloads the WinCE image fine, but when the image boots and tries to connect through KITL it hangs and I am not sure why.
Here is the output ...

My colleague and I have a question about the July 06 QFE release
regarding" Windows CE 5.0 device may reject TCP packets when the TCP
sequence numbers become too high", as described in this link
http://support.microsoft.com/kb/922439.  We are wondering what sequence

I've just created my first Windows CE OS image. Now I think to have two
possibilities:
1) to copy nk.bin into my MMC card and boot from MMC card (is it right?)
2) flash nk.bin into the ROM of my device: how can I do it?

     I have a button(key) driver including a Volume Up/Down key
controlling. I change the gain value directly by writing register value
of audio codec while the volume is pressed. Although I can change the
volume in this way, the scrolling bar of OS Desktop volume setting did

Dear Sir,
I use PXA27X , WINCE 5.0 and Philips UCB1400 as audio chip to develop
my project.
In the normal usage, audo and touch function work well.