I am using the Windows CE 4.2 with a Geode based board from Advantec.
The board is SOM-4450F.
I am able to create a new bsp and download and boot the image but am
not able to see my Compact Flash card. I am trying to work with a

Often, during development
i need re-makeimg for downloading to the debug machine after changing
platform.reg
Is there a way to speed up it? for example, do not re-makeimg if changing

as an OEM we deliver SDKs (rolled with PB 5.0) to our customer. MSI
file is plus minus 60 MB (MS libs from CESYSGEN dir and our OEM
platform specific libs). Question: may we also deliver libs from
"C:\WINCE500\PUBLIC\COMMON\OAK\LIB\ARMV4I\RETAIL" to our customer in

I can find the ways via menu or registry to remove the key sound everytime
you hit a key or touch the screen.
Thanks

the remote desktop on windows ce 5.0 has a display tab and in that there is
a slider that lets you choose the size of your desktop, only thing is that
the slider doesn't work, the slider does not move from its default position.
Anyone else seen this behaviour.

We have a custom platform based on the PXA270 and have based our driver code
on the MainstoneII SD card driver. We are trying to stream video from the SD
card and every now and then we get a pause, maybe when the SD card is
filling a buffer or something.

I m using winCE 5.0. I m building run time image for CEPC. I m trying
to download image by ethernet.
At the developement workstation device is detected. When i boot my
target device using floppy disk, target device is sending BOOTME

How can I specify my build version for my nk.bin build?
Thanks in advance.

In one of a bsp module i am studing, there are such a line in sources
file
SOURCELIBS= \
        ... \

i step by step to work according the default setting, but when i build the
work, will appreance the as belowing error:
"Success parsing locale file
makeimg: FATAL ERROR: Cannot open

           I built my platform and it is running properly.But when i
modified the locale in the PB by checking out all the other languages and i
had checked in only the English(U.K) ,English(United States) and Japanese
languages.

On doing makeimg I am getting .rel file related error. I have checked that
.rel file is created in the worksapce folder.
Can anyone tell me the reason for same?
-------------------------------------------------------------------------

Hi,I use CE5.0 and smdk2410 BSP.I have created a BinFS partition and an
extended partition in  the same store by bootpart at boot phase.The
BinFS partition saves the nk.nb0 which is loaded to sdram by
bootloader.The extended partition is mounted as a user's disk.

Our production platform runs on pxa255 CE4.2.  We recently ported
CE5.0.  For the existing CE 4.2 version, we can successfully activesync
with pc via the usb device port on our platform.   However we can not
make the similar case work under CE5.0.

Which kind of file should i configure .reg .dat or .bat.Thanks for any tips.