[Windows CE 5.0, Sharp SDK LH7A404]
My HR-TFT LCD driver works fine in portrait mode( 240*320 ). I found it in
the source code that it is using GPE( not GPERotate ). I want to change it to
landscape( 320*240 ) mode, but I don't konw how to do it clearly.

when i am compiling i am getting this error.
makefile.def: Including
C:\WINCE500\public\common\oak\misc\sources.ReleaseType_OAK
NMAKE : fatal error U1073: don't know how to make

Excuse me, may I ask a question about Internet Explorer using in Windows CE6
Beta? I made a MFC ActivieX, and use REGSVRCE.EXE to register the .ocx file,
and it shows success, and then be invoked in test.HTML, but encountered
ERROR. It seems that the ActivieX have not be ...

Dear all, My DM320 platform has a USB 2.0 full speed dual-role OTG
controller, but I don't know how to develop a wince5.0 driver for it.
Can you give me some helps on it?  And is it possible to realize a OHCI
or UHCI driver for it? Thanks.

Hi, On CE 4.2 PXA255 When playing a large wmv file from SD card i get the
following messages
before Mediaplayer crashes the whole system.
What do the following messages mean, the buffers increase continously.

i'm an italian programmer and i want to use win-ce 5 for develop a new board
for industrial appliance.
So i've installed win-ce 5 on a dev board EDB9315A from cirrus. All it's ok
but when i try to enable hive registry i don't understand which are the

I am developing an application in wince5.0. This application will access the
low level driver by IOCTRL. But I can't debug into the driver with VS2005.So
I want use PB to do this debug.
I have read this

I've just create my platform with PB5 in italian language. Someone can give
me some ideas for support in my platform chinese language ?
Thanks in advance

I am using wince platform builder 5.0 and I am creating resource
"Version" to provide version information in my WinCE driver dll file.
The .rc file was created successfully and it is also showing version
related information i.e. file version, product name, product version,

I am using PB 5.0 and I am trying to boot up CEPC through hard disk. I
am successfully booting thru hard disk, but I not able to find hard
disk folder on my CEPC. I have included
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile]

I am trying to get the KITL to work through Serial Port on OMAP5910 based
board.
The boot loader connects to the host and downloads the WinCE image fine,
but when the image boots and tries to connect through KITL it hangs and I am

Anyone have issues / problems with Symbol MC3070 running WINCE5.0?
I'm trying to upgrade the device from WinCE4.2 to 5.0 and been told by
software vendor that MC3070 have issue with Version 5.0.
Any comment is welcome good or bad.

I have USB Modem and Serial Class for ActiveSync How can I switch
between two USB client in Windows CE 5.0, programaticaly without
changing registry settings in Defualt client for USB client.
Thanks

I am maintaining a WINCE5 NDIS5.1 INTEL 100Mbps Ethernet driver, and am
looking into a problem where the system tray icon representing the
network interface is updated to show disconnected state as much as 20
seconds from when the LAN cable is pulled. I have debugged into the

I did the exact same thing as in article
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnce50/html/win
dowsce_kiosk.asp
.When i test it on emulator(x86_release) , the get the following error on
startup (Access Violation)