Hi,
I need desperately to find a file I know is in nk.bin
how do I do it? any utility?
anyone

I change platform.reg in platform\myplat\files and run "build and
sysgen current bsp". After the image is built, i looked into
%_FLATRELEASEDIR%\reginit.ini, and find that my changes don't goto this
file.

I'm using a VIA EPIA board and two USB devices - a smart card reader
and a touchscreen, for an interactive kiosk.
These USB devices are not recognised by WinCE(5.0) on startup, but they
_are_ recognised if hotplugged after the CE desktop has appeared.

Dear Greats,
I am using Windows CE 5.0, AMD Board Support Package for Au1200
processor. AMD Evaluation boad DBAu1200 reference board.
On every boot, my system time reset to default "Jan 1, 2003 12.00 PM"

Dear Sirs:
            I have a question when I develop usb driver. When the system
was in Idle mode(sleeping mode), User plug in the usb cable, this time I
want to resume the system from Idle mode to normal mode, How can I do it in

There have been many posts about "SOURCELIBS" & "TARGETLIBS" in sources
file. I thought I understand them before I meet the problem here:
I clone a public driver "\usbfn\class\serial" into BSP directory. I
created 2 directories in BSP, Src and Dll. I copy all the files in

I'm trying to load nk.bin from CF using a PXA270 dev board. The image I
have works fine using a network boot, but if I try to load it from CF,
once the status bar for "Load Image (ATA)" hits 100% nothing else
happens. Is there a standard thing I need to do, or is this something I ...

I have cloned the SMDK2410 BSP  that comes in CE5 and got to it teh
point where I can download an image via ethernet to an LN2410SBC.  The
image downloads, EBOOT jumps to the image and I get the following on PB
and via the serial port.  After this it appears dead.

I work to make pxa27x's camera interface divice driver. In WinCE 5.0's mainstone patch has agilent
adcm2650 camera diriver. Originaly it don't have some header(cs.h,csmedia.h). but I copyed from
WinCE 6.0 's header files, then i edit some code, finaly compled and made dll file.
So ...

I have ported an AP from CE 3.0 to 5.0.  Due to some speed issues I am writing directly to toggle handshake lines on the FFUART (using the MmMapIoSpace).  I wish to use the same logic for the AP on CE 3.0,  but it seems that I cannot find platform builder 3.0.  (And by the way I ...

I have ported an AP from CE 3.0 to 5.0.  Due to some speed issues I am writing directly to toggle handshake lines on the FFUART (using the MmMapIoSpace).  I wish to use the same logic for the AP on CE 3.0,  but it seems that I cannot find platform builder 3.0.  (And by the way I ...

 I am trying to get a PXA270 BSP to run on my board, and after the
bootloader receives the image from Plaform Builder and displays the message
of  "Jumping to Virtual Address", I get no more messages on my HyperTerminal.
I connected a JTAG emulator to it, and I can see that the ...

Hi, I'm trying to write a serial communication software using PB and run
it on a connected embedded board.
Here's my code:
//____________________HEADER_________________________________

I am running RDP under CE 5.0 on both (Geode LX and VIA) platform and I have
encountered the choppy audio playback issue. Any one has idea on what is
going on there?
With a FAT client (windows XP client), I do not have any this kind problem.

Does any one know how to rebuild the pserial CETK test?
The docs seem to be all wrong and several files called out in the "sources"
like comm.cpp are not even present.