I am facing a problem when I am connecting my device(through Platform
Builder) to the PC and running an MFC application on it.
The steps I followed are as follows:
1. Build the MFC application

I should like to add an USB network adapter to my BSP.
I add the USB function drivers, but when I plug in the adapter USB cable,
winCE ask for driver.
Other devices (i.e. USB Hard Disks) works fine.

Pxa270. Mainstone II BSP.
I'm trying to increase my system's core frequency, system bus
frequency and mem clk frequency as per the table given in 3-20 of
PXA27x processor family developer's manual.

   I am using the CEPC BSP, and my PB is 5.0
This is my settings..
PRJ_ENABLE_FSMOUNTASROOT=1
PRJ_BOOTDEVICE_ATAPI=1

Dear friends:
        When we call DismountStore to upload a storage, Does WinCE system
post a message to application?
        for example, when we play a mp3 on sd card, the sd card was plug

I port my device to ce6.0 use MainstoneIII BSP, after OEMInit, hang and no
debug message.
What's wrong and any idea?
Thanks

I've never had to do this until now, but I've built a driver that loads
an FPGA stored in a flash disk. I've given it built in registry entries
so it loads when the system is booting.
For some reason, loads fine but it cannot access the flash drive when

I'm having trouble adding or changing a device name in the
HKEY_LOCAL_MACHINE\Ident registry field.
There seems to be a lot of discussions that say that unique names can
be programmatically done but no real examples. If I put a unique name

I work with wince5.0 and s3c2440, and when I transfer data through
usb-serial function drive with my own programm , I found the MAX speed is
about 400~500kbps (unit is bit). then I transfer a file (about 1.2M
bytes)with activesync, the time is 28 seconds, the speed is also

Anybody knows when the pbinitenv.bat file is invoked?
I try to call to this file in my platform.bat file, to update the
environment, when I change from release to debug version or viceversa. to
get the %WINCEDEBUG% with the correct value.

i am looking at the "NDIS_802_11_STATISTICS " structure, it has two
members "ReceivedFragmentCoun" and "TransmittedFragmentCount"
that can be used to determine network activity (if there is any
download/upload on the NDIS driver, etc), they are defined as

Is anyone testing a Windows CE-based device to verify DST transition dates
in the US?  Two recent QFEs to the OS have adjusted how DST transitions are
calculated/processed, but it still appears that the time zone information in
the registry is for the old transition dates.  Is ...

Using platform builder, I've successfully built & downloaded CEPC OS
for WinCE 5.0; 'debug' & 'release' variants. My goal is to boot the
kernel from hard disk on the target & then, using Visual Studio 2005,
develop/debug applications via ActiveSync.

   I am currently developing BSP for MC9328MXL litekit. I have
developed the bootloader and written into my flash. My board is using
CS8900A ethernet controller. I copied the code provided in
Platform\common directory into my platform. I had problem reading EISA

Excuse for my bad English.
I have installation of some program and I would like to install it on
Emulator (WinCE 5.0). The program will be installed through ActiveSync.
I have connected ActiveSync to Emulator without any problem and run