Hello Group,
I am trying to see the cause of a problem which turns my device to
suspend state. I am trying to see the debug log of Power Manager which
is

that is my architecture :
dir1\
     source
     makefile

  I'm looking at working on a board that has several AIC23's on
for multiple audio outputs so it looks like CE6.0's UAM is the
way forward to support this. However the documentation seems a
little bare and the only sample I can find so far is :

I am using hp ipaq which is runing windows mobile 5.0. And I use Ratoc
pcmcia usb host adapter.
I developed a usb driver works fine when I plug in when the ipaq is on.
But the problem is, my usb device are not detected at

Has anybody gotten the hive-registry to work on external ROM with CE
6.0? I cannot get the IPSM driver to work (although I haven't received
official word from intel yet on compatibility), nor can I get it to
work on a compact flash card. These are the registry changes I've made:

Hi~, it is said that OAL must update curridlelow & curridlehigh to support
OEMIdle().
and I found the sample update the two variables in the following way:
   // Update idle counters

I have cloned a BSP named MyBSP from DeviceEmulator, then I create an
PDA OS using MyBSP.
During the last stage of build, makeimg, it threw out an error: can't
find file kitl.dll.

I realize the answer is probably in the manual... but I've been poking
around and haven't found a clear answer. I found the following page:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcedsn40/html/c
mhowselectingethernetcardforcepc.asp
which has a very nice ...

I'm using a display driver based on winCE5.00 GPE library. But in 4bpp
gray scale (and also in 1bpp and 2bpp) GPE library doesn't work
properly : Alignement exception is raised and in 4bpp there's akind of
shrink effect on the charaters.

My IDE is PB5.0.
By default, We know the nk.bin would be mapped to \windows and it is
read only.
If you add a flash storage (or ATAPI) support, you could find a "\Hard

We are trying to port our CE5 based BSP to CE6.
We have done some work on the OAL and KITL and have got the to stage
where we can download and the system starts to boot up.
But then it stops.

WinCE 5.0
CF 2.0
OpenNetCF 2.0
ICOP PC104 board and BSP

Hi, can anybody give me the right download link for the Windows CE 5.0
NMD Wizard? The link on Mikes weblog does not work.

I am not sure that I'm posting in the right place, please correct me if I'm
wrong.
We have a Wireless LAN driver + HW which we hooked to WinMobile.
I was wondering if the latest CETK tool which is testing Wireless LAN

I connect target system at home and when I download the image (attach
device) it work at 36 KB/sec.
This is about 1/5 slower the speed I got at work.
At work - Dev computer connect to work net