Hi, all
When I just try to study PB build process, I found that "pbxmlutils
/generatebuildfiles" generates following 4 files with each conditions.
PBPreSysgenCustomBuildActions.bat

I have an image for GeodeLX 800 the clock gained 14 secs in 14 Hours. How to
fix this issue?
Thanks in Advance
Piyush

Can someone please explain when OALIoCtlHalInitRTC is called?
First time I start up my system (cold start), this function is called
and initializes IRQs, etc.
If I press the reset button (warm start, RAM not erased), the

I use the IPSM to create the "PSM" "partition"  on the remnant
flash(others for OS image),but I can not see the partition in the
storage manager.
How to get this "PSM partition"`s handle and format this "partition"?

       I am developing BSP for MC9328MXL litekit. I have developed the
bootloader. I am not able to download nk.bin. The board has CS8900A
ethernet controller. Platform Builder recognizes the target device and
download window pops up and it displays downloading nk.bin at a rate of

I could not find the driver for CE5.0 or CE6.0
Does anyone any suggestion for me?
Thanks !

I had a problem with a LAN driver (SMSC9115 with PXA270) under CE 5.0.
It looked like it was missing interrupts, so I put a breakpoint on
OEMInterruptEnable to check whether it was called, and found out that
it was actually called a lot of times, while I expected just once.

hi,all
   I want to develop a RFID driver based on Intel PXA270 in
platformBuilder 5.0.After reading the Platform Builder for Windows CE
help 5.0,i can not find any sample program helpful.

Is it possible to set a timer in CE with a better resolution than 1 ms e.g.
for generating an interrupt?  If so, hten how precise is it (jitter)?
Thanks
Ole

I have a cab file that installs GSM driver. What I do now is copy the
cab file thro active sync and install it by double taping it.
Now I want to install the cab file automatically. How to install the
cab file during bootup ?

I was trying to use PkgDiff to create an update package, but failed
(didn't get the update package).  I got the following message.
Microsoft (R) PkgDiff 5.2.0.0
Package Difference Generator

What is the optimal way to power off/on the WLAN card?
I am trying to power off/on the WLAN SDIO card on my device
programmatically
I believe my card is power manageable since when i turn it off from

LEAF_ENTRY SetRunMode
;;;;;set PXA270 Run
Freq;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
   ldr     r0,=0x41300000

How I can build wince 6.0 OS image(kernal only) for my board. I already have
wince 5.0 OS image(kernal).
Thanks in advance
Sanjeev

I have WINCE 5.0 running on a platform. I want to view the registry
enteries. Is there any command analogous to 'regedit' of windows or any
way by using activesync . Any help is appreciated.
Thanks,