Probably this was asked many times before, but I could not find a decent
answer in any group by googling, so here we go:
My platform is in landscape QVGA orientation, so to make the Control Panel
applets landscape-oriented I simply removed the "Quarter VGA Resources -

I have a .cec file from wince5.0. now I want to open it with 6.0,but
6.0 told me:
the .cec file could not be imported:
d:\tmp\a.cec: warning PBC4000: Unparsable Date value.

     I am developing BSP for MC9328MXL litekit in WINCE 5.0 Version.
After
successfully downloading the kernel image into the target, the kernel
calls OEMInit()

I am trying to remove irda support from device.
Since Irda support require following dlls - irdastk.dll, ircomm.dll
and irsir.dll.
Using IMGNOIRDA removes irdastk.dll and irsir.dll but does not remove

I'm trying to make my cepc board accessible (ftp, telnet) without
ethernet. I have Irda (dongle connected to my serial port : 115200bps
max) in replacement.
I set up a RAS ppp server through a IRcomm virtual serial port on the

I'm using a Freesacle ARM4 board. I'm using a USB US Robotic Max USR5421
wireless adapter. I'm able to compile the image using the Platform Builder.  
But Wince 5.0 doesn't detect the adapter.  There was a post I found that I
needed to modify the USB host Driver from the link ...

Hi, all.
The ce 6.0 has increased build time than earlier version. I think it takes
more  1.5 times than 5.0. Is there any body who knows the reason of this?

Hi to all,
I have searched the catalog but I could not find any drivers related with
single peripheral interface driver.
Can anybody comment on this please?

My requirement is to run an application in the system tray. When I click on
the exe it should start in the system tray.
Any help would be much appreciated
Thanks in advance.

Hi experts,
     I am working on pxa270 with WinCE 5.0.I want to use the two 64 MB P30
family flash under nCS<0> as paired flash (128 MB).For this purpose i have
set

I've got a S3C2410 based board from Embest. The board came with Linux
installed but I want to run WinCE 6.0. The main problem is that the
board doesn't have a NOR Flash to Boot Loader. Is there any ready NAND
Boot Loader that I can use???

Hi Comunity,
I have a great problem where I´m hanging since more then one week.
Perhaps somebody can help me.
My problem:

Hy,
i need to save user name and password to access LAN on a CE 5.0 MIPSII based
target. I have pemanenet file system and hive registry. I verified that doing
a test by accessing to a LAN based on a Windows 2000 Server there was not

   I create an application(WinCE50) to do following:
       Step1: Create a file in NandFlash disk(FAT16).
       Step2: Write 2500 bytes into the file.
       Step3: Close file handle.

I am working with a CEPC:x86 using a dedicated RTL8139 compatible card
for download/debug and booting the device via Pen Drive.
I would like to add USB mass storage support to my device so I have
included FAT File System and USB Storage Class Driver catalog items to