I would like to use the BIOS bootloader to download the image via
ethernet.
I have appropriately configured the hard disk and it is trying to
download via ethernet. The problem is that the eboot.bix is looking

I am using a QVGA for Accelent IDP. I have got the bootloader working
and the Windows CE almost. The only problem is the color. The color in
boot loader is OK. But the windows color is bluish. If I open a
command window, the cursor is white. Any tips would be very grateful.

I'd like to active the fileserver
I add  :
-File server
-windows networking API...

I'm newbie to CE. I've received a X86 CE based device and need to add a
driver to the image contained. It must load driver at boot time.
First way: modify registry . I saw into flash and observed that no
registry.dat is exposed outside NK.BIN so I've no possibility to modify

Hello, Everyone
Are there any method to put an exe file (or any other files) into nk.bin?
Thanks in advance!
Cheng Shi

I have seen a few postings on this topic, but no definitive resoltution yet.
We are using the voipdemo sample application on a Windows CE 5.0 platform,
PXA270 based.  The voipdemo and RTC stack is working sucessfully when we
include KITL in the image.  

I want to overwrite some data when transport packets over Ethernet. My
idea is: add the passthru driver from
WINCE500\PUBLIC\COMMON\OAK\DRIVERS\NETSAMP\, make it work and then edit
the passthru code to reach my goal.

My project has the following structure:
\MyProj
   Dirs
   \Sub1

I added a display driver (for the Silicon Motion SM501 chipset, called "SMI
Voyager Family" in Platform Builder catalog) to my image and this fails to
load with the following debug messages (the DLL of the driver is DDI_VGX.DLL):
(.......)

When using "build -c" in a Microsoft-suppled project, source contains
references to UNALIGNED macro causing  "warning C4228: nonstandard extension
used : qualifiers after comma in declarator list are ignored" warning
messages.

I'm working on a project with a processor board and want to run windows ce
in it.
I've made the flash memory bootable and copied all data like autoexec,
config, bootcepc and the win ce image on my device.  At the boot after

I need to create an application for folder selection dialog and I
have
created using SHBrowseForFolder concept.Iam using CEPC with x86
procesor booted with wince 5.0 image.

We are students at Johns Hopkins and are working on a project with
Windows CE. We have compiled an image using Windows CE 5.0. But on
booting the image we cannot see our hard disk folder.
As described in

I am writing a small application on a  wince device to access data from
a device driver through IOCTL calls. But when I compile the application
I get a error as below.
'DeviceIOControl': identifier not found, even with argument-dependent lookup

     i am new to this group.i am expecting some help.actually in my
system while making runtime image though i set IMGFLASH as 1 but still
the nk.nb0 is not generated.here i use cvrtbin to create the nk.nb0 so
is there any change required to be done in the config.bib file.