we have a board based on the IXP425 and use the BSP for the IXDP4xx. The
Problem ist, that the Kernel is starting and hangs somewhere (almost
everytime at the same point) and I don't even know what the problem is or
what should be expected to happen next.

I saw several postings on this subject, but non seems to have an answer to
my problem. Thanks for any input in advance..
I am trying to get my reference board (Sandgate II from Sophia Systems) run
active sync. I am using Platform Builder Windows CE 5.0.

I've build a WinCE 5.0 with a ROM-only file system with Intel PSM
mounted as root with hive registry.
However, under "Control Panel > "System"  > "Memory", I could still see
the sliding bar for adjusting the amount of RAM for "Storage" and "Program".

After I reinstalled the PB 5.0, there is a dialog said "Platform Builder was
unable to read the device settings from the Datastore.". I'd tried to remove
C:\Documents and Settings\account_name\Local Settings\Application
Data\Microsoft\CoreCon\1.0 from HDD but it is not work. Any ...

   I have a bluetooth chipset of CSR-- BC31A159A.with WinCE5.0
   I have added Bluetooth Stack with Univrsal Loadable Driver,but I failed
at last.
    Here I have some questions.

When I try blddemo from command line a get a bunch of these errors and
then the final makeimg fails at end.
Any ideas? I can provide more log.
Visual Studios 2005 V8.0 with Platform Builder for CE6.0.

We are developing a USB Device Driver in Windows CE 5.0.  We are using
the
BSP for Intel PXA27X ARM Processor. Our USB device has 1 Bulk-In
endpoint, 1

I have a problem to install the "Windows CE 5.0 Platform Builder -
Cumulative Product Update Rollup Package (through 12/31/2006)"
QFE- Install file: WinCEPB50-061231-Product-Update-Rollup-Armv4I.msi
At the end of the installation I get this error message:

I changed my OS Design and now I can't debug .Net Applications from Visual
Studio 2005. Non-.Net-Applications work well.
I compiled in Debug mode. Startet Debugger but the breakpoints dont work. If
I set one VS tells me it can't be reached because a module couldn't be

I have a remote control that delivers keypresses (in CE5.0).
For volume up/down '+'/'-' is received.
I need to couple these keys to the volume control.
And I need to map some other keys.

currently I try to password protect the telnet and FTP server on my CE 4.2
device. Setting the appropriate registry flag brings up a login dialog when
connecting via telnet. Now where to get a user/password pair? I included
NTLM into the platform. Further I wrote a short program ...

Hi
Where can I get Intel XScale PXA270 bsp ?   PB 5.0 Evulation Edition did not
have it .
Thanks a lot~

I created a new BSP (CEPCClone) by CEPC clone.
When I use the new BSP to build a new image, it's still need to mofity the
startup.asm and pc.h on x86 common directory to support more than 64M RAM.
How can I do to "copy the original code" into BSP directory and let can

I am using USR5421 Wireless MAXg USB Adapter in CEPC. I can able to detect
only 4 Access points at a time. But i have more than 10 Access points in my
area. My PC can detect all those access points. I am able to connect to those
access points which are not listed in My Available ...

I am trying to test the real time performance of WinCE6 and the
results I get are horrible.
I have an own Hw PCI device on a x86 and developed a driver for it.
The driver is working fine. The device sets an interrupt every 4msec.