I have a design concept that I am trying to proof that it can be done
we have a server (XP machine) that needs to connect to wince devices
(one device at a time for now, maybe many devices later)
over Active sync (RNDIS) and send some commands to the device (I am

Folks,
We're on CE5.0, x86, AMD Geodelx platform but use the emulator to run our
unit tests on the build machine each night.
We've exceeded the 64MB limit of the emulator. Apparently there is no way to

Has anyone got the new High capacity SD cards working with CE?  (SDHC V2.0
of the spec.)
I cant even seem to get hold of the specification to see what has changed.

Reference to mainstone III, I'm using the default PXA270 LCD driver.
As we are using a 640x480 panel, with very similar timing as the default
Toshiba LTM04C380K, I changed the platform.reg to use the LTM04C380K
setting.

·¢¼þÈË: "Chris" <kaylar@126.com>
Ö÷Ìâ: SDHC support in WinCE 5.0 & 6.0
ÈÕÆÚ: 2007Äê5ÔÂ10ÈÕ 9:49
I have seen the update in April QFE.

Hi experts,
we are working on wince 4.2 dbpxa255 platform. we are using intel P30
NOR strata flash 64 MB(paired flash 32MB +32MB. we are trying to
implement persistant file storage system for 2MB of flash. please find

Hi, I'm using Windows CE 5.0, the CPU is samsung's S3C2440A.
I create a chinese project, so its default language is chinese and it
automatically add a simsun.ttc file to the system, this font file was so
big(~10MB) that make it much slower loading the system. I found that we

 I am working with Wince5.0.
I developed my own bootloader and with my Eboot.nb0 i load OS into
the targert device.
Now i am developing serial device driver.

Suddenly I expire build errors in my PB5 - I have now tried almost
everything to get rid of it (reinstalled PB5, upgraded to newest version
etc) but I get the following build error no matter what I do (following is
the last part from the sysgen log from building a new unmodified ...

Hello CE World,
is it possible to write Stream Device Drivers for WindowsCE 5.00 with Visual
Studio 2005?
I tried by creating a Projekt with a DLL Wizard for intelligent Devices but

   I have 2 partition entries in the NandFlash on WinCE50 device.
The 1st entry: BinFS for WinCE50 OS image.
The 2nd entry: FAT16 for User Disk.
I wanna export 2nd enrty to WinXP, like USB Disk. (Usb function

   I tried to use NKRegCreateKeyEx function in OEMInit,but I failed.
   from the help doc,this function only use in OAL layer.so why I can't do
that?
   it can use in kitl.c--OALKitlInitRegistry()

I have developed a battery driver. I found that the rate of calling
BatteryPDDGetStatus function is too fast. I would like to change the rate of
calling this function. I found that
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\Timeouts]

That past few months I show up to the CE5.0 chats but noone seems to be on.
Are these stagnant?
Does everyone attend the 6.0 chats now?
-jeff

Hi mates, here you have a deep analysis of a problem, I hope not to bore you
J
We have a WinCE device which is NOT battery powered.
So after a power-off/power-on cycle SDRAM contents are lost (not a PDA-like