Hello, everyone:
        I am trying to add bluetooth serial port support into my
Wince5.0 platform. And I am using Platform Builder 5.0. The bluetooth
adapters used are DBT-120 Ver.B4

     Under the environment of  WM5.0,my PDA  has realized A2DP,Hands-free
and other bluetooth profiles with native microsoft bluetooth stack. But, i do
not know how to test these profile stability.Is there any software or tools
with relation to this test? And do you have related ...

May I know if the USB NIC can be use with the mainstone III eboot?
I saw some usb nic codes in it, but not sure if it is completed.
Anyone got the USB NIC working under the mainstone III eboot?
Where can I find some example for it?

I am want to know the procedure of setting up Lauterbach and Platform
Builder to debug the BSP code.
Thanks in advance.

I am using a custom Wince 5.0 OS which contains a RAS server. When I
connect to it with a direct line from a windows PC I get connected and
everything works fine.
But it is also required that the WinCE device needs to be connected by

There exist al nice list in the msdn: the Inbox module is not
supported anymore in CE 6.0.
I looked out for any replacement in the CE 6.0 catalog, but could not
find a real substitution or anything similar to a mail client beside

   now, i will to implement a windows CE 6.0 Device.
   and hardware must to support A2DP / AVRCP function.
   i can't fine the component in platform builder.
   somebody can tell me. how to deploy.

My installation of VS 2005 and CE 6.0 doesn't have the Core Connectivity
components available in the catalog view.
I've repaired my installation to no avail.
How can I fix this?

I have a CE5.0 platform using PXA270 processor with bluetooth uses CSR
chip, with uart interface. The default baudrate to the chip is 921600,
which is too high. I like to set it to 115K. All I am looking for the
command to CSR chip to change the baudrate from 921600 to 115K.

I build image on embedded board named IEI WAFER-lx800 with two 8139 pci lan
card and one pc104 addon 8019 lan card(ne2000).When I ping target with "ping
x.x.x.x -t -l 6000" from 8019 and 8139 as same time,system halt in 5 minutes.
Could anybody send me other ne2000 lan card ...

I am getting DEBUGCHKs in NDIS51 in files efilter.c and sendm.c.  I am
running CE 5.0 GEODE/CEPC version with an RTL board w/ onboard 82559
Ethernet controller. I have installed the NIC driver E100CE.dll.
The network works: I can DHCP, ping, and be pinged, but I get the following

I use the mmtimer routines for generating timer based events for my
system.
The ap's i use are the timesetevent , timebeginperiod etc. available
in mmtimer.lib

I have a problem running my debug version OS.
Here is what I did:
1.     I build a debug version OS with 0 errors.
2.     I copy this OS to the flash on the mobile using Bootloader.

I'm using Platform Builder 5.0 and Visual Studio 2005.
I've built a platform based on the Tiny Kernel for the Device Emulator and
added components based on my requirements. After making an SDK and installing
it, when I build an application in VS2005, I get a compile error

Hi, everyone,
I am wondering what is the best way to dump the content of a FLASH
chip?  I have a Cirrus EP9301 platform with WinCE 5.0 and IPSM
implemented.  If there is no easy time to do it through software, I