I have one question. I have finished my serial driver for SH7760. I need
serial port for ActiveSYnc, because my board does not contain USB port. With
my driver, everything seem ok. Every tests passed of, serial communication is
without any error. But if I'll use ActiveSync to ...

Does CE4.2 support multiple BIN OS image?
How to build such OS image BIN files?

I want to use the Headset profile using the Audio gateway service and
the btscosnd bluetooth audio driver.
I am connecting successfully to the headset using the audio gateway,
and I can hear music played with the Headset's speakers. That means

how to use Internet Explorer in kiosk mode , with the following command
iesample.exe -k

I am trying to create a custom HID cleint driver for a custom HID
device under CE 5.0 / Pocket PC, and I am having big problems.
I am looking for some help on solving a problem with
creating the PIPES.  Here's where I am and what I have.

I have a camera driver available with my BSP.
If i build the image in release version the camera driver gets loaded
by the device manager and I could see it in the
[HKEY_LOCAL_MACHINE\Drivers\Active] key.

Hi, I am using Windows CE 5.0 and Samsung S3C2440A.
My BSP is so weird that sometimes cann't sleep(suspend) successfully. But it
can always enters OEMPowerOff, I think entering OEMPowerOff means the system
has successfully finished his work,so I think it is the OEMPowerOff's

I am using WINCE600 with Visual studio 2005 with all updates
installed.
I have wince500 also on same machine.
My platform builder is unable to generate image, it shows reginit.ini

System ARM with Windows CE 6.0
FindFirstFile did not enumerate system folder. (like \Documents and
Settings\default\Recycled)
Is there a way to enumerate system folder?

HELP:
"
To pass data between an ISR and an IST
  1. Reserve physical memory for the ISR in your Config.bib file.

I'm working on a project base on WinCE 5.0, Samsung S3C2413 with 2~3GB
iNAND disk drive.
Before, we have our system working fine with following settings:
- FAT16 filesystem

I used platbuilder 4.2 to build an emulator image, but there were some
errors building, and i don't know how to fix it. Here is build.log:
Starting sysgen phase for project ( common )
Found localized resources for Languages ( 0404 0407 040C 0410 0411

In my wince(5.0) SMDK2440 board, I have two storage devices.
One is SD card(Storgae card), the other is builtin nand flash(resident
storage).
Now, I've implemented usb mass storage function for sd.

My question is about Intel PSM. How do I know the number to write in
PSMHAL_CUSTOM_MALLOC_POOL_SIZE (?)
I work with wince 6.0 , MainstoneIII , p30 64 MB flash, IPSM version 4.0.
Thanks a lot

I have several devices I use for kitl debug and also for retail.
I use to set the NOLOAD flag for the retail driver in OALKitlInitRegistry if
it was to be used for Kitl.
(this worked in CE 5.0)