Can Activesync catch WinCE device by ethernet ?
I've learned how to catch by serial and USB cable , but I am not sure if
ethernet
connection is ome way for Activesync .

At some point I will need to make a custom battery driver.   I have
gotten the example in ($WinceRoot)/public/common/oak/drivers/BATTDRVR
to be functional.    This works nicely and I can change the percentage
of charge using the example application etc.

I am facing a problem in bring up of wince on a custom imx31 board. WHen
the system comes up i get the below message. The system never comes out
of this message and the only option is to reset the system. Could
someone explain how to resolve this problem or to change the ...

I get the same error installing any QFE or rollup package. From the msi log:
<snip>
Action 16:02:49: DELETEINI.
Action start 16:02:49: DELETEINI.

I'm working on a headless-device on windows CE 5.0. My device is using SQLCE
2.0 which is integerated to the image created by PB 5.0. Now I have to
integrate in the image a copy from a default database user.sdf to the
flashdisk on the device.

I'm trying to build a device driver for a PXA270-based target using PB5. I'm
getting the following error message:
// start error message
TARGETNAME: mySdioClient

I read documents  in wince.
I couldn't  get exactly  differentiate  different types of USB
drivers.
like USB function controller driver, Generic USB serial,

Does anybody know, where i can get a WinCE 6.0 bsp for the Intel
855GME chipset? as an alternative, some information about WinCE 6.0 bsp for
Via CLE266 chipset with bootloader well-functioning because bootloader
downloaded from VIA web site doesn't working properly!!!!

My serial kitl finally connected, but when I press the break button,
... nothing happend.
the debug msg is:

I used an evaluation version of PB WCE5.0, and now I bought the official
kit. I would like to register the installation I now have (with the keys of
the official box)  without reinstalling the whole thing. Is that possible?
CK

I have set up a HIVE registry in my system, which works fine with my program
using RegFlushKey(..). My questions are:
(1) I create a dial-up connection, and wish to save it into HIVE so that
when the system is power up again, the dial-up connection is still

Hi,all
  Our hardware platform only has a lcd disply(no touch),a debug uart,a
DM9000 ethernet card with CPU based on ARM926. And the ethernet card only
has debug code(no driver code).Our software platform is PB6.0. The kitl

There don't seem to be any good books on recent versions of Windows
CE.   I would like to learn more, especially about the build system
and power management.    Can anybody recommend a good source?   I've
seen this product mentioned here in the forums, is this worth it?

Hi  all,
        Can anybody guide me  with the steps to use platform builder
for ARMV4I debug platform builder.
   Presently I m using platform builder 5.0 for ARMV4I debug

We are trying to bring up wince-5.0 on a custom imx31 board. We could
bring up Eboot and it runs fine on the board. But on bring up wince ,
the board hangs at the following message. The OEMAddressTable address is
not getting printed. Does anyone have any idea what could be the ...