I have an issue related to the NAND flash driver development on
WINDOWS CE5.0.
The NAND device is a large bock NAND which has a  sector size of 2048
bytes.

I download my OS image from PB to target ARM9 board.
I traced the logs printed on the hypertermianl, I found the OEMLaunch
print the Launch Address and Image Start Address. But they are
different. The RAM image is loaded from RAM and saved in RAM, why are

My Eboot is located in a NOR flash at address 0x0000_0000, and it will
download and program the OS image from PB to the target ARM9 board.
After going through the forum for the related posts, I find out that
there are two possible senarios,

I have an issue related to the NAND flash driver development on
WINDOWS CE5.0. The NAND
device is a large bock NAND which has a  sector size of 2048 bytes.
I am able to mount the NAND device and carry out read and write

There are 2 uart in my board(PXA255 + winCe.net 4.2),One is STUart and
another is HWUart.
I use STUart as COM1,but now I need to add COM2.The registry file and
driver was modified by PXA255 reference board(LUBBOCK).and I add

After including the default battery driver that comes with WINCE 5.0
and doing a build and sysgen process, two files get created
1)battdrvr_lib.lib
2)battdrvr.dll

I've added the active sync catalog compents to my win ce 5.0 design.
Is there any thing else I need to do for active synce to work?
I tried to run repllog.exe on my device, however i got the following error:
Communications Error

           When downloading the OS image into device emulator, i try to
execute my
           test program in Rel directory. Then, a dialog appear with
message "Can

some time ago i posted my problem. I have a problem to start up in
fash, but in RAM everything works fine. Now somebody told me that i
could be a problem with invalidate the cache. Now after adding some
debug messages i have the following output(see below). I 'm working

I'am working on A Web-based interface that is runing at the HTTPD Server
that Windows ce is providing. The system for which the project is build for
is an headless device. I developped a authentication system that will check
the password on a sqlce database, and then redirect the ...

Hello I am working on wince 5, I got IPSM on board. If I use RAM and
ROM filesystem and Hive based registry (intended store on IPSM)
do I need to set a IPSM partition to MountAsRoot.
I found when I set IPSM as Mountbootable only the registry will gointo

I'm using OMAP SDP 2430 and WinCE 6.0.
In the document, CSST_QuickStartGuide_SDP2430, I can see the below
instruction.
ii. Download the eboot.raw (Boot loader) to flash with verify option

I have an SIMCOM508 GSM modem. I tried the GPRS Connection in the PC using
"phone and modem options" and "Network Dial UP option"  in  Windows XP using
the serial port COM1. I am able to browse the internet.
But I am trying in windows CE 6.0 using the "Dialing" and "Network and ...

some time ago i posted my problem. I have a problem to start up in
fash, but in RAM everything works fine. Now somebody told me that i
could be a problem with invalidate the cache. Now after adding some
debug messages i have the following output(see below). I 'm working

on wince 5.0 , I run a program from the sd card. when I pulled out the sd
cad, about 5 seconds , the program exit automatically, just like explorer
who exits as the sd card pullout.
the program has no code related to the sd operation, yet it doesn't open any