Hi,
I just finished installing platform builder for CE PC and when I open
platform builder or open a work space I get the following error.
Line:1144

Hello, everybody?
I'm looking for a lpc super i/o chipset which support 4 channel serial port.
With that chipset, I'm going to implement 4 rs-422 ports.
And I wish to adopt the chipset which provides win ce driver.

The question is for everyone specially Dean.
Is there a way to stop the default driver to get loaded ?

can i directly(with out any modifiaction in the source code) download
mainstone iii bsp to intel pxa27x processor development kit.please
help me.i was using mainstone ii bsp shipped with wince 5.0 .with this
i could download the image to intel pxa27x processor development

I'm developing a platform around an ARM9 processor.  I've built my own
OAL and BSP for the silicon and platform, but when I build the image
it ends up compiling code in the COMMON/SRC/SOC/PXA... folder, the
COMMON/SRC/ARM/ARM920T folder and the COMMON/SRC/SOC/OMAP* folders.  I

          When a new bsp is created a config.bib file is also
created.is it only used by platform builder to create the os image or
it is is used by anything else.if yes then how? please clarify me
about it.

      I'm working on a x86 based board, intel chipset. I want to port WinCE
6.0. I've successfully ported 5.0 to that board. I've migrated that BSP to
6.0, and it is booting well. I'm booting from the Compact Flash.
       USB drive is mounting well, but the CF not mounting. ...

I'm testing USB mass storage driver.
when I attach USB pen Drive, message box will popup with "unidentified
USB device"
as i have only one Serial/USB port, when i attach USB devie I can't

Prior to CE 6 you could develop a driver separate to the OS using evC++.
My question is how do you do it in VS2005 with CE 6.
eg If I have a board running CE6.  I have its SDK but not its BSP.
I have some new hardware for which I want to build a driver that can be

PB 5.0, ROM only file system, XSCALE-PXA270
I have an issue. Our application creates some files that need not be
stored in flash. But now with the current filesystem everyting is
created in flash. The files are continuosly updated by the

Can anybody tell me how power  is managed in Display driver because
the function that is there "DrvPowerHandler" in no more being used in
versions after Wince 4.2.

I am trying to build a deserialized miniport driver, I but have some doubts
regarding MiniportSendPackets. At WCE help I found “It also assumes that all
deserialized miniports will complete each packet descriptor input to their
MiniportSendPackets functions asynchronously with ...

I'm currenty trying to fix a problem that's exactly the same described in
QFE-KB3887697. After loosing some packages on network the time to
retransmissions is likely to be excessively. After searching for a download
of the QFE I discovered that QFE-060830-KB923805, I've already ...

I am working on a scatter gather implemntation for DMA since my DMA
controller supports it.
The scatter gather implmentation which I found were basically of the
type in which either the source or destination memory block were

Error opening D:wmpaud7.wav. Error code = 0x00000002
189629 PID:3c30016 TID:3c80016 ReadWaveFile failed. mr=00000001 ,
What is mr indicates ?