We are trying to implement persistent storage in a PXA255 processor
based board, with 64 MB of paired flash with two PC28F256P30B85(32MB)
flash chips. We are working on Wince 4.2. i find stratak and stratad
in the public\common\oak\drivers\block\msflashfmd folder. Following

Hi ppl,
I have a question here, plz help me understand this .
I have a 3 pin model of camera driver.
The microsoft  Doc says that, the three pins (STILL, PREVIEW, CAPTURE), are

 seems FMD is expecing a sector size bigger then 512 so that it can store
extra status flag for sectors. can I use cf/sd card's 512B sector for FMD?
can I ignore the status flags(as there will be no bad sector), or I'll have
to find a way to store the status flag somehow?

     I'm migrating a bsp from 5.0 to 6.0. When compiling some source codes,
it is giving some errors which i cant rectify. First i got Link 2001,
unresolved symbols  _Securitycheck error. While searching for help, i found
that i should remove /Zi option to eliminate that error. ...

I am trying to build a Miniport driver. I manage to have something working
(ex: ping, ftp) but my problem is that I am having a miniport reset every 6
seconds even when I am not sending or receiving packets, is this normal?

I have just spent the best part of three days working out why my
platform rebuilt from source control has stopped working.
The answer is that the Microsoft PB 5.0 QFE for April 2007 has updated
the source files for the default bus driver (defbus.h, defbus.cpp) but

I have a question about MSFlash StrataFlash NOR driver. I want to include
that flash driver in my platform. I'm using wince 6.0, MainstoneIII, PXA270,
64MB P33B flash, MCPII_MODULE.
My Image is stored in flash, but gets copied to ram and run from ram. My

       I have to write the bootloader for sdcard.
But i dont have any previous exp. of working in bootloader.can you
please help me how to proceed.

I have developed an application in VB6 which I have placed in a folder
in C:\ELabDAU3100Software\  along with the support Run Time components
like JPG's & TXT's required by it. This Application runs perfectly
fine if it is executed manually. But if the same application is made

Dear Everyone,
I am new to this group here and I really hope to get some suggestions
from you guys.
Rightnow, I am using a Windows ce 5 based wearable computer which

I have a PXA255 platform using 3 serial ports (COM1,2,3). In debug mode I
have no problems, however my serial ports mobe number, COM1 hardware is
acessed by debug using address COM3:, COM3 hardware is acessed by COM2:...
etc.

I put on my compact flash my file NK.bin and some achievable files
(like conmanclient2.exe and cmaccept.exe.....etc) and now that I am my
screen Windows CE 6.0 I do not find them and I also went in the
repertory "my device".

I have developed several ARM based, USB connected, embedded devices using
another RTOS (ThreadX).  I want to switch to CE to take advantage of its file
system and networking.
Can I use an iPAQ 1955 to "simulate" my device?

I want to write a device driver for Windows CE. Right now I'm not
familiar with it. Please refer me the specific products/kits which i
need to write a WinCE device driver. I'm using Windows XP sp 2 and
Microsoft Visual C++ 6.0(professional). I tried to find some details

Dear Experts,
       I'm developing USB audio driver for the WindowsCE5.0. Until now,
everything is good execept handling surprise remove USB audio device. The
problem is i'm playing music via Media player and surprising remove device