Hi..
I could see from wince 6.0 that x86 based device emulator is removed and ARM
based device emulator is added.
If I need to use this ARM based device emulator which BSP should I install

I want to add my project directories in the existing workspace.
Can any one tell how to add it in the IDE so that I dont have build the
project through command prompt.
waiting for the reply,

I am hitting a DEBUGCHK statement when I run almost any of the GDI CETK test
modules.  I hit the statement after the test has completed and the objects
are being torn down.  Here is the failure statement and my stack at the time:
NK Kernel: DEBUGCHK failed in file

I have installed wince 5.0 on a compact flash that has two partitions:
the first is called "hard disk" and the second "hard disk2". Both of
them are formatted FAT.
Now I am trying to use TFAT for the second partition.

hi?
I'm using windows ce 5.0 and .net cf 2.0.
And from my c# application, I wanna power off my device.
Is it possible?

We are having windows CE BSP working on our board. The board is having
battery and driver for it
Now there requirement is to add support for USB charging feature on
Windows CE 5.0 OS.

Dear Group,
I am quite new to WinCE Development and trying to get started with PB 6.
I would like to use the Target - Run Programs option to test and Debug
Applications and Drivers without having to place them in the image.

Is there any certification program for drivers running on winCE/mobile
like in WinXP/VISTA?
If there is, can I have a link to the web site?
Thanks.

Get the above message when trying to connect to emulator using Remote Tools.
- VS2005 with SP1 etc
- PB  CE 6 with SP1 and R2
New installation of PB on existing VS installation.

How to enable or disable branch predication for ARM core in WinCE6.0?
If any one can give the pointer to this it will be very helpful.
Thank you in advance,
Rashmi

I create a application to found a scroll text effect. But I meet the
high CPU usage issue not matter I use the DirectDraw or GDI to flush
the bitmap into vedio memory in a cycle painting. My program use the
SetTimer to provide the drawing time. And its interval is about

I got error while compiling NDIS driver in WinCE 6.0
error : KeGetCurrentIrql Identifier not found
Also my code has pragma prefast that also gives error in WINCE
error : unknown pragma

I'm porting a BSP from WinCE 5.0 to WinCE 6.0. I have been able to
successfully perform all the migration steps necessary. However when
the bootloader is being built (see the build log snippet from VS2005)
BUILD: [00:0000000183:PROGC ] Building LINK Pass in D:

I'm bringing up a new SH4 design (SH7763).  Below output is as far as it goes
before generating an exception.  I am using PAtoVA for hardware access, and
not using SCIF FIFO.
Help states:

Hello everyone,
I have an application that checks the CFDisk at start up for updated files.  
This process worked fine with CE4.2, but when I created a 5.0 image it seems
that the CFdisk is not available until 3 seconds after startup.   My