I'm working on a device that will be used in a remote location where power
may fail. I have created a User and Password using NTLMSetUserInfo. However,
when I turn off the device and restart it I have to recreate the User and
Password again.

Am working on windows mobile 6.
I have done the touch driver development...Am working on touch
calibration.....
1)

Hi people, i have another question about wince startup process:
I created a subproject on platform builder, that is quite simple and
only prints a message:
#include "stdafx.h"

Here is what I received in the CE chat:
John Spaith [MS] (Expert)[12:16]:
Q: [7] We developped a program for CE 5 that save a Network Share on our
headless device, it doesn`t work anymore on CE 6. The only function we use

I feel the need to resurrect this post because it went unanswered and it is
getting ignored.
We are experiencing a problem with the LAN91C111 similar to what would be
expected of an intermediate driver that invokes the NdisMSetAttributes method

Hello everyone, I am trying to get my gprs module but I cannot figure the
unimodem registry configuration.  I have create a dial up connection
properly to open the port on which my modem is connected.  By I am not able
to registered on the network.

1)
In file WINCE500\PUBLIC\COMMON\OAK\FILES\common.reg are defined all Times
Zones.
The incorporation of this definitions are conditioned by

I recently moved my development environment to a DELL XPS M1330
(Broadcom networking card). Everything works well except for one small
problem. For some reason the download rate of an OS image is much
slower compared to my previous desktop. the download speed is around

After loading my image, (debugger kdstub), it seems that the start up of the
kernel hangs. At least, the output in PB stops after the following lines
     0 PID:0 TID:0 -OEMInit
     0 PID:0 TID:0 Error Reporting Memory Reserved, dump size = 00020000

hi?
I'm trying to add activesync function to my target device.
I installed a net2280 pci card to my lx800 board and add ce catalogs like
followings.

I added LAN91C driver to OS design (wince 5.0)and i am getting the
following debug messages.
DLL is detaching once its initialized
 LAN91C111 <= DriverEntry

I am having RS232 and RS485 in my target device,
I built separate dll for RS232 and RS485. The above driver codes are
same except one hardware setting.
In platform.reg i have to configure for RS232 and RS485.

I know Windows CE's Wireless Zero Config supports 802.1x however
wanted to get more details of EAP-TLS support.
Unlike my XP/Vista clients which work fine with Win2K Certificate
Authority, WinCE asks for a Base64 Encoded Certificate Request (PKCS

I am using intel core 2 duo, ich8, 965gme chipset wince 5.0.
I am using intel iegd display driver, using lcd device.
The fonts are faded, is there any registry setting for making it darker?
or some catalog files has to be added?

I have to develop an application/module in which i have to do process
authentication.
Suppose there are two processes, Process A and Process B, than Process A
should be allowed to access the file and Process B should not be allowed to