hi?
I need to check a value of some memory address.
But I tried it by doing view--> debug window --> memory, I couldn't see
anything at all. All memory is shown as '?' mark.

I'm using VS2005 and windows CE 6.0 R2, in trying to mount a CF drive via an
IDE interface on a CEPC system. I've included both the ATAPI, ATADISK, and
storage manager control panel plug-in components from platform builder into
the OS.

I want to display a full screen message "sleeping" (for example) or a bitmap
just before going to suspend. I am suspending by issueing a VK_OFF.
What is the correct place to implement this and how to implement. Any
suggestions?

I'm migrating from CE 4.2 to 6.0. One of the DirectX component I need
is mp3dmod, and it is tied to the sysgen variable
SYSGEN_DSHOW_MP3DMOD.
In CE6.0, I didn't find any way to select this component for my system

In "Build OS" menu,  there are three build options: "Sysgen", "Build and
Sysgen" and "Build and Sysgen Current BSP".  I wonder when shall I use one of
them and which one shall I use?  Could anyone tell me the detailed
differences of those three build options?  Thanks!

We intend to develop an automotive device which uses GSM/GPRS connection to
communicate to a server to transfer data periodically on WinCE 5.0.There is
no voice call support.
Anybody has experience on the same as i am new in this field

Our networked CE 6.0 based product can be configured to use static (v4) IP
addresses and so it is possible (likely) that IP address conflicts can and
will occur from time to time. Presently when this happens during testing CE
detects the situation and shows a default duplicate IP ...

In CE 5.0, Is that possible to make a network bridge  between Ethernet and
GPRS modem.
According to the "Network Brdige Registry configuration sample",  we must
specify the network adapter name, that what's the name will be?

I am building wince 5.0  on new hardware,  and I am trying to get the my
SDmemory card to come up.    There are many layers to this driver and I am
trying to peel  my way through it,  but sure could use some help.  Device
actually supports SDIO ,  so I have included SDMemory and ...

I am receiving several GDI CETK test failures.  I am debugging these
failures, and I am observing "screen halves mistmatch" failures.  When I view
my LCD, the cursor is active and appears to be causing the discrepancies
between the two screen halves.  Is it known that having the ...

Since the PXA BSP I have does not support overlay2 or DD in the LCD
driver, and sources are not provided to even add overlay2 and DD into
driver, the decision was to implement, as proof of concept, overlay2
support outside the LCD driver plotting directly to FB. We don't care

I am trying to use the Sychip driver included with WinCE 6.0 ( R2 ) with a
Sychip 6065 WLAN card. When I plug in the card, I get the following message,
and then the pegassdn.dll detaches:
253575 PID:400002 TID:2580016 ==>NdisOpenFile

We have been using a stable WinCE 4.20 platform for about 4 years in our
product, and we're seeing a problem which we can only attribute to using a
new line of hard drives.
In the past, we have used our Image on a wide collection of hard disks:

hi?
Is it possible to make ce device as a usb mass storage device to host?
Of cource, using activesync I can connect the ce device via usb line with
host.

I am running CETK test cases for my network card which acts as Wifi
card.
I was checking the One card minport driver test..
My driver is failing the "SuspendResume: test case.