I am trying to exposes my storage in my device as mass storage to PC.
Wince 5.0 is running on the device.I used the following registry settings
=================================================================================
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]

I am trying to port the graphics device driver from wince5.0 to
wince6.0. I am at the stage where I can build my driver and run the
wince6.0 image NK.bin with my driver on my CEPC target. My driver
contains different components (e.g kernel.dll, disply.dll,

I just made my CE 6 BSP work. Unfortunately, I got an data abort
exception after calling ShowWindow. This happens in every
applications. Does anyone have a clue on this by helping check the
following information?

I'm developing a bootloader for ARM926 EJ-S, but there's a serious problem
need your help.
I've enabled MMU in bootloader in order to use virtual addresses.
But when I turn off MMU before jumping to the physical start address of

When I debugged the device by KITL, There are many following output:
"FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary tabledoesn't exist for
logical sector 0x0!!! "
....

I am facing a strange problem. I can suspend and then resume by activating
wakeup interrupt first time, but when I try to suspend/resume second time ,
the system hangs. Can any one help in this situation? I think the system
can't restore some thing important during first resume. Is ...

hi, experts,
   (WinCE 5.0, samsung arm920t cpu.)
   There was already one audio codec chip on my board ,that had been driven
as *WAV0*.

I am looking into WriteRegistryToOEM/ReadRegistryFromOEM to implement saving
of my touch calibration (as everyone is doing all the time)
The documentation confuses me a bit :
"Only a fully saved registry can be restored; attempting to restore a

I am working on windows Embedded CE 6.0 bluetooth serial port profile. Using
the virtual serial port (Port Emulator Option) I am trying to communicate
with the other devices. I have included all the profiles supported by the
windows ce bluetooth stack.I have two USB bluetooth ...

Very old issue, but there is no clear answer in this user group. I am
using WinCE 5.00 and trying to place Desktop ICON in the predefined
place permanently, how can I do that. Please help.

We are in discussion of a project using CE.
Our Device is going to be a fixed on an automotive with GSM/GPRS modem.
The device is inteneded to have data communication to a server using GSM/GPRS.
[there is no need of voice call support]

I seem to be on a streak with these sorts of problems.  I'm running a
Windows CE 5.0-based device which includes printing support.  I can print
successfully to a suitable HP laser printer attached to the serial port
*using my own application*.  However, when I try to print from ...

   I am trying to use usbfunction mass storage,my work based on:
D:\WINCE500\Public\Common\OAK\CSP\ARM\Intel\PXA25X\USB\Function\PDD
   after I connect device to PC, about 1 minute later,a disk ico appear.why
so long and how to settle this problem?

I am trying to use the usb function driver with the mass storage class
and am losing my RAMDISK folder on my device once I attach the USB
cable and the UsbMsFn STORE_Init function is called.
Here is the debug from after I attach my USB cable to the host and the

We used to have in our product a DiskOnChip working nicely with
TrueFFS.dll (WINCE420). Because of an end of life of this part, we're
going for their G4 model on the future production.
From what I understand in the datasheet, we need the version 6.3 or