I know that LoadCEPC or BioSLoader is my answer to booting the NK.bin from
CF card.Went to the link below and copy boot.zip content into CF card and
append with a nk.bin. http://www.acrosser.com/wineos/wince.htm
But not successful my board still boots on previous unix OS.

hi, everyone:
i got a building error and the sysgen stopped building my OSdesign.
I installed vs2005 + sp1, then wince6.0+sp1 and emulator2.0, when install
wince6.0, i chose only ARMV41 since only it can have emulator. but my real

Hi
Do i need to create an active partition in my CF card so that Master Boot
Source can locate the Boot sector for my OS (nk.bin)?
Is there a website that shows how this can be down??

My CE6.0 application is misbehaving.
I see exceptions occurring in the platform (in the retailmsg window), when I
boot the target from VS2005 and run the application on it.
I would expect these exceptions to be passed to the application, but that

Does anyone know if it possible to do USB host emulation in the device
emulator?
I see a USB host device driver in the device emulators BSP but I can't get
it to select.

hi?
Is there anybody who could successfully run device emulator of ce 5.0 at
vmware?
When I tried it, the boot process was stopped and the emulator remained

We are writing Wince5.0  Driver  sd host controller currently we are
using sd memory card for testing purpose I am unable to see sd memory
folder in the explorer window
my  logs are as follows ..

Hi
I have some doubts on the use of CreateFileMapping(CFM for short form)
function.
When we use CFM, does whole of the file present in the disk copied to kernel

I tried to build a CE 5.0 OS by Using PXA270 SDK, but it cant run Pocket PC
app.
This app is PocketPCMark ARM, and it need the mfcce300.dll Doclist.dll ...
Have anyone a good ideal for this question? thx.

is it possible to set a password for the Windows CE 5.0 Services  
(SMBServer, FTP, etc) in the project.reg ?
I can do that over the Web Server interface, but I´m not sure how to  
define it in the registry.

How would I go about  building  a debug version of code,  where I would
selectively want to turn off the debug  on certain modules ?   I.E.   I want
to build a debug version but say my USB EHCI stack  I want non-debugged
version in the build ?

my ps2 KeyBoard driver can't support Multimedia keyboard.
but normal KeyBoard is OK,
Is it mocrosoft's MDD driver can support Multimedia keyboard?
someone can answer me?

We are observing memory leak problems at suspend/resume in a S3C2412
platform that are not produced if the USB Host feature is not
available (BSP_NOUSB=1). It is used the USB Storage Class but the USB
port is not connected to any device. The average leak is 475bytes per

I have a fully functional WinCE image with NAND Flash support.Now, I
have enabled HIVE based registry. On first time WinCE image booting, I
see the booting stops at mspart.dll.
I enabled Auto Mount, Auto Format and Auto Partition. Now the WinCE

Dear Friends;),
I again came with issue. Like everytime assuming full support from you
all.
I am trying to port composite driver.