i have disabled demand paging (bei set ROMFLAGS =1 in
config.bib) to force some application  to RAM ...
and this setting cause sometime a problem when i run
my application in kernelMod!

   I am working at CE6.0, when I read the code of PM, and at
PlatformSetSystemPowerState, I can't find the definition of function
PowerOffSystem at MS private code. Does anyone know it?
Thank you

Good morning,
I have already seen a thread about OS update where the suggested operation
is :
"Easy to do if your OS is running from RAM. In case its XIP, you can

I have a CE6 display driver DLL, which does not have the K flag. This
driver works fine in one CE6 environment, but it does not work in
another one (same HW, same processor, ...). In the non-working
environment, CE6 complains that the K flag is missing, in the working

Hi all
VS2005 and Wince 6.0 using
Errors
1-Catalog Id "StringTable:MS:Cepc:1033" duplicated in files

I have cloned the driver from :
C:\WINCE600\PUBLIC\COMMON\OAK\DRIVERS\USB\CLASS\USBSER
As far as I can tell this driver should implement virtual comports for USB
devices.

I using WinCE 4.20 for CEPC.
Os building is ok.
But when I try to build USB driver, Then I meet a link error:
Linking...

I read some posts about a CDC driver for CE(6.0).
The advice is to write a client driver.
I expect such a driver to have been written for CE many times already.
Who knows of one ? (commercially available ?)

I want to run the CETK NDIS Performance Test for my target platform
which has only one network adaptor. According to MSDN documents, we
need 2 network interfaces: one for establishing PB:target board
connectivity and the other one for CETK test.

I have builded the platform with PBWince4.2 but I see a strange situation.
The library Aygshell.dll that has been builded has need of this library :
1.DLL
I see this request with Depency_Wolker

The documentation for the April 2008 QFE set for CE 5.0 seems like its
incomplete. It has only one component listed as fixed under 080430_KBKB951302
with no description. (Note the double KB's)
Is there a more complete or better description file ?

We are developing a MainstoneII based VoIP handheld device, on WinCE
5.0 with PXA 270 processor. On making VoIP call we are getting  delay
of 3 seconds. What can be possible reasons for this, whether any
driver like ethernet cotroller can cause a delay. We are using SMSC

I want to create multiple partiontions in SD memeory card. Is it possible to
create partiontions in the SD card? What are the registry settings required?
Thanks in advance.

I am woriking at mainstoneii platform and using wince5.0.
I try to integrate the sd host controller driver, but there is an error
during the driver load.
Below are the debug message:

We developed a hw assisted decode filter which gets connected with the
video renderer.
We have enabled DirectDraw support in the display driver.
We have accelerated blitting for the RGB offscreen surfaces allocated